Высокий · CVSS 7.1EPSS 0,16%Нет опубликованного исправления
RDMA/rxe: Validate num_sge/cur_sge before indexing wqe->dma.sge[]
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Validate num_sge/cur_sge before indexing wqe->dma.sge[]
For a user QP, qp->sq.queue is a ring the application writes directly,
so rxe_post_send() takes the is_user branch and only schedules send_task
without validating the WQE. rxe_requester() consumes it in place via
req_next_wqe() and calls copy_data(), which indexes
&wqe->dma.sge[cur_sge] with the attacker-controlled num_sge/cur_sge.
Only the kernel path bounds num_sge (validate_send_wr()); the user WQE
is never checked, so a local unprivileged user can post a WQE with an
out-of-range cur_sge or oversized num_s
Без оценкиEPSS 0,22%Нет опубликованного исправления
irqchip/gic-v3-its: Prevent leak in its_vpe_irq_domain_alloc()
In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Prevent leak in its_vpe_irq_domain_alloc()
When its_irq_gic_domain_alloc() fails, the following
its_vpe_irq_domain_free() fails to invoke its_vep_teardown() for the
corresponding interrupt, which leaks the resource.
Invoke its_vpe_teardown() in the error handling path to avoid the leak.
[ tglx: Massaged change log ]
In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: validate MADT IOAPIC entry bounds
The IOAPIC hotplug lookup parses both MADT and _MAT records directly.
The MADT walk previously used a subtable's declared length to advance
the cursor after only locating a generic header. The _MAT path likewise
passed a generic header to the IOAPIC helper.
Validate that a current record has a complete generic header, that its
declared length is contained in the available record range, and that a
typed IOAPIC record contains the full fixed IOAPIC body before reading
its fields. Use the same relation for both MADT and _MA
Без оценкиEPSS 0,18%Нет опубликованного исправления
ACPI: PCI: Clear driver_data on all paths that free the acpi_pci_root
In the Linux kernel, the following vulnerability has been resolved:
ACPI: PCI: Clear driver_data on all paths that free the acpi_pci_root
acpi_pci_root_add() assigns the freshly allocated root to
device->driver_data before dmar_device_add() and pci_acpi_scan_root().
Both failure paths reach the end: label where root is kfree()'d, but
only the pci_acpi_scan_root() path clears driver_data first.
When dmar_device_add() fails during a hot-add, root is freed while
device->driver_data still points at it. The ACPI core does not clear
driver_data on attach failure, so a later acpi_pci_find_root() call may
dereference this dangling pointer.
acpi_
Высокий · CVSS 7.3EPSS 0,17%Нет опубликованного исправления
RDMA/core: Fix use after free in ib_query_qp()
In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix use after free in ib_query_qp()
When querying a QP via the netlink flow the only synchronization
mechanism for the said QP is rdma_restrack_get(), meanwhile during the
QP destroy path rdma_restrack_del() is called at the end of the
ib_destroy_qp_user() function which is too late, since by then the
vendor specific resources for said QP would already be destroyed, and
till the rdma_restrack_del() is called this QP can still be accessed,
which could cause the use after free below.
Fix this by moving the rdma_restrack_begin_del() to the start of the
ib_destroy_q
Высокий · CVSS 7.8EPSS 0,13%Нет опубликованного исправления
RDMA/core: Fix potential use after free in ib_destroy_cq_user()
In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix potential use after free in ib_destroy_cq_user()
When accessing a CQ via the netlink path the only synchronization
mechanism for the said CQ is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
ib_destroy_cq_user(), which is too late, since by that point
vendor-specific resources associated with the CQ might already be
freed. This can leave a short window where the CQ remains accessible
through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_begin_del() call to the start of
ib_destroy_cq_user()
Высокий · CVSS 7.8EPSS 0,13%Нет опубликованного исправления
RDMA/core: Fix potential use after free in ib_destroy_srq_user()
In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix potential use after free in ib_destroy_srq_user()
When accessing a SRQ via the netlink path the only synchronization
mechanism for the said SRQ is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
ib_destroy_srq_user(), which is too late, since by that point
vendor-specific resources associated with the SRQ might already be
freed. This can leave a short window where the SRQ remains accessible
through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_begin_del() call to the start of
ib_destroy_srq
Высокий · CVSS 7.1EPSS 0,17%Нет опубликованного исправления
RDMA/core: Fix potential use after free in counter_release()
In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix potential use after free in counter_release()
When accessing a counter via the netlink path the only synchronization
mechanism for the said counter is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
counter_release(), which is too late, since by that point
vendor-specific resources associated with the counter might already be
freed. This can leave a short window where the counter remains
accessible through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_del() call to be before the
freeing of
Высокий · CVSS 7.8EPSS 0,16%Нет опубликованного исправления
RDMA/core: Fix potential use after free in ib_free_cq()
In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix potential use after free in ib_free_cq()
When accessing a CQ via the netlink path the only synchronization
mechanism for the said CQ is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
ib_free_cq(), which is too late, since by that point
vendor-specific resources associated with the CQ might already be
freed. This can leave a short window where the CQ remains accessible
through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_del() call to be before the freeing
of the vendor-specific resources
Высокий · CVSS 7.8EPSS 0,16%Нет опубликованного исправления
RDMA/core: Fix potential use after free in ib_dealloc_pd_user()
In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix potential use after free in ib_dealloc_pd_user()
When accessing a PD via the netlink path the only synchronization
mechanism for the said PD is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
ib_dealloc_pd_user(), which is too late, since by that point
vendor-specific resources associated with the PD might already be
freed. This can leave a short window where the PD remains accessible
through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_begin_del() call to the start of
ib_dealloc_pd_user()
Высокий · CVSS 7EPSS 0,15%Нет опубликованного исправления
thermal: intel: int3400: clean up ODVP on probe failures
In the Linux kernel, the following vulnerability has been resolved:
thermal: intel: int3400: clean up ODVP on probe failures
evaluate_odvp() creates per-ODVP sysfs files before the thermal zone
and later probe resources are registered. The current unwind path only
calls cleanup_odvp() from the late sysfs failure path, so failures after
evaluate_odvp() but before that label, including
thermal_tripless_zone_device_register() failures, leave the ODVP files
and storage behind.
Move the ODVP cleanup to the common ART/TRT unwind path so every failure
after evaluate_odvp() releases the ODVP state. Also clear the cached
ODVP pointers in cleanup_od
Без оценкиEPSS 0,18%Нет опубликованного исправления
ext4: drain in-flight DIO before buffered write fallback
In the Linux kernel, the following vulnerability has been resolved:
ext4: drain in-flight DIO before buffered write fallback
generic/746 started failing intermittently on ext3 (no-extent inodes).
The test triggers 'Page cache invalidation failure on direct I/O'
warnings and subsequent fsync returns -EIO. Adding a 50ms delay
between ext4_buffered_write_iter() and filemap_write_and_wait_range()
in ext4_dio_write_iter() makes the race almost always reproducible.
On no-extent inodes, DIO writes to holes cannot use unwritten extents,
so ext4_iomap_alloc() leaves m_flags=0 and ext4_map_blocks() returns 0.
The iomap layer then returns -ENOTBLK, c
Средний · CVSS 5.7EPSS 0,22%Нет опубликованного исправления
ext4: use fsdata to track inline data write state and fix race
In the Linux kernel, the following vulnerability has been resolved:
ext4: use fsdata to track inline data write state and fix race
Instead of checking the live inode state (ext4_has_inline_data(inode)
and ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) in the
write_end handlers, use the fsdata parameter of the address space
operations to explicitly pass down the state in which write_begin
prepared the write.
A concurrent thread (such as ext4_page_mkwrite()) can convert the
inline data to an extent between write_begin and write_end. If this
happens, the write_end handlers would previously miss the inline
write_end path and fall th
Высокий · CVSS 7.1EPSS 0,2%Нет опубликованного исправления
ext4: validate readdir offset before accessing dirent
In the Linux kernel, the following vulnerability has been resolved:
ext4: validate readdir offset before accessing dirent
A corrupted directory can trigger the following KASAN report when
ext4_readdir() resumes from an invalid position:
BUG: KASAN: use-after-free in __ext4_check_dir_entry+0x5ef/0x820
Read of size 2 at addr ffff88810a646000 by task repro_linear/509
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xd0/0x630
kasan_report+0xce/0x100
__ext4_check_dir_entry+0x5ef/0x820
ext4_readdir+0xcde/0x2b70
iterate_dir+0x1a1/0x520
__x64_sys_getdents64+0x12b/0x220
do_syscall_64+0xf9/0x540
entry_SY
Без оценкиEPSS 0,18%Нет опубликованного исправления
wifi: ath6kl: avoid buffer overreads in WMI event handlers
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: avoid buffer overreads in WMI event handlers
The following WMI event handlers currently read from the event buffer
without first verifying that the message was large enough to hold the
expected event:
ath6kl_wmi_scan_complete_rx()
ath6kl_wmi_addba_req_event_rx()
ath6kl_wmi_delba_req_event_rx()
Add length checks to prevent overread.
Без оценкиEPSS 0,22%Нет опубликованного исправления
wifi: ath11k: Avoid buffer overread in ath11k_wmi_tlv_op_rx()
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: Avoid buffer overread in ath11k_wmi_tlv_op_rx()
Currently, in ath11k_wmi_tlv_op_rx(), the firmware buffer is read
without first verifying that the buffer has enough data to hold a
header. This could result in a buffer overread.
Add an upfront length check before dereferencing skb->data as a
wmi_cmd_hdr. The check is placed before the trace_ath11k_wmi_event()
call to preserve the existing trace semantics (tracing the full raw
WMI event including the header), unlike the analogous ath12k fix which
could use skb_pull_data() directly.
Compile tested only.
Без оценкиEPSS 0,21%Нет опубликованного исправления
ext4: fix buffer_head leak in ext4_init_orphan_info
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix buffer_head leak in ext4_init_orphan_info
ext4_init_orphan_info() reads orphan file blocks with ext4_bread()
and stores the returned buffer_head in oi->of_binfo[i].ob_bh.
If ext4_bread() succeeds but the orphan block magic or checksum
validation fails, the function jumps to out_free. However, the old
out_free loop starts releasing buffers from i - 1, so the current
buffer_head at index i is skipped.
This leaks the buffer_head reference obtained by ext4_bread() on the
bad magic and bad checksum error paths.
Fix this by tracking the number of successfully read bu
Без оценкиEPSS 0,21%Нет опубликованного исправления
pinctrl: mediatek: use devm_gpiochip_add_data() for GPIO chip
In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mediatek: use devm_gpiochip_add_data() for GPIO chip
The gpio_chip is allocated with device-managed memory but registered with
the non-managed gpiochip_add_data(). This was harmless while the drivers
were built-in, but once they can be built as modules and unbound/rmmod'd,
devm frees the gpio_chip's memory while it is still registered, causing a
use-after-free.
Register it with devm_gpiochip_add_data() so it shares the same
device-managed lifecycle, which also lets the manual gpiochip_remove()
error paths go away.
Без оценкиEPSS 0,21%Нет опубликованного исправления
pinctrl: mediatek: free EINT resources on unbind
In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mediatek: free EINT resources on unbind
mtk_eint_do_init() creates an IRQ domain, populates it with a mapping for
every EINT line and installs a chained handler on the parent interrupt,
but none of these are ever released. This was harmless while the drivers
were built-in, but now that they can be built as modules and
unbound/rmmod'd it leaves behind a dangling IRQ domain, interrupt mappings
whose chip data points at freed memory, and a chained handler that keeps
firing into that freed data.
The plain allocations in mtk_eint_do_init() already use the device-manage
Средний · CVSS 4.8EPSS 0,21%Нет опубликованного исправления
scsi: ufs: core: Validate string descriptors
In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Validate string descriptors
The string descriptor length includes a two-byte header while the UTF-16
payload starts after it. utf16s_to_utf8s() expects a count of UTF-16 code
units, not bytes. Passing the payload byte count can make it read beyond
the descriptor buffer.
Validate that the payload has an even byte count, pass a code-unit count to
the converter, and allocate sufficient UTF-8 output space.
The raw string buffer starts after the descriptor header but its size is
bLength. Copying bLength bytes from that pointer can read beyond the
response buff