p PatchFirst

PatchFirst · Свежие уязвимости

Уязвимости linux-fips · Страница 114

За последние 30 дней в linux-fips опубликовано уязвимостей: 468; в каталоге KEV: 0.

RSS ↗ JSON ↗
Фильтры уязвимостей
Сбросить фильтры

Уязвимостей: 8596

  1. CVE-2026-72142

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)

    In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix locked bus on SMBus block-read of 0 (atomic) SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic (polling) path rejects it as -EPROTO. Worse, it returns without a NACK+STOP: the next receive cycle has already started, so the target keeps holding SDA and the bus stays stuck until a power cycle for this i2c controller. Reading I2DR to obtain the count likewise arms the next byte on the count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly and left the bus held. Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  2. CVE-2026-72140

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    i2c: mlxbf: Fix use-after-free in mlxbf_i2c_init_resource()

    In the Linux kernel, the following vulnerability has been resolved: i2c: mlxbf: Fix use-after-free in mlxbf_i2c_init_resource() If devm_platform_get_and_ioremap_resource() returns an error, mlxbf_i2c_init_resource() frees tmp_res before reading tmp_res->io to get the error code. This results in a use-after-free. Save the error code before freeing tmp_res.

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  3. CVE-2026-72138

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    xen/gntdev: fix error handling in ioctl

    In the Linux kernel, the following vulnerability has been resolved: xen/gntdev: fix error handling in ioctl When gntdev_ioctl_map_grant_ref() fails to copy the operation result back to userspace after successfully adding the mapping to the list, the error path returns -EFAULT without releasing the reference acquired by gntdev_alloc_map(). The mapping remains in priv->maps with a refcount of 1, causing a memory leak and a dangling list entry. Additionally, gntdev_add_map() may modify map->index to avoid overlap with existing mappings. Therefore, the index returned to userspace must be obtained after gntdev_add_map() completes. Fix this by

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  4. CVE-2026-72136

    Высокий · CVSS 8.8EPSS 0,17%Нет опубликованного исправления

    xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink

    In the Linux kernel, the following vulnerability has been resolved: xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink xfrmi_changelink() operates on at most two netns, dev_net(dev) and the interface link netns xi->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in xi->net can rewrite an interface that lives in xi->net. Gate xfrmi_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed.

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  5. CVE-2026-72135

    Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления

    tpm: Make the TPM character devices non-seekable

    In the Linux kernel, the following vulnerability has been resolved: tpm: Make the TPM character devices non-seekable The TPM character devices expose a sequential command/response interface, but their open handlers leave FMODE_PREAD and FMODE_PWRITE enabled. After a command leaves a response pending, pread(fd, buf, 16, 0x1400) passes 0x1400 as *off to tpm_common_read(). The transfer length is bounded by response_length, but the offset is used unchecked when forming data_buffer + *off. A sufficiently large offset therefore causes an out-of-bounds heap read through copy_to_user() and, if the copy succeeds, an out-of-bounds zero-write through

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  6. CVE-2026-72133

    Высокий · CVSS 8.4EPSS 0,18%Нет опубликованного исправления

    spi: uniphier: Fix completion initialization order before devm_request_irq()

    In the Linux kernel, the following vulnerability has been resolved: spi: uniphier: Fix completion initialization order before devm_request_irq() The driver calls devm_request_irq() before initializing the completion used by the interrupt handler. Because the interrupt may occur immediately after devm_request_irq(), the handler may execute before init_completion(). This may result in calling complete() on an uninitialized completion, causing undefined behavior. This has been observed with KASAN. Fix this by initializing the completion before registering the IRQ.

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  7. CVE-2026-72129

    Критический · CVSS 9.8EPSS 0,71%Нет опубликованного исправления

    nvmet-rdma: handle inline data with a nonzero offset

    In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: handle inline data with a nonzero offset nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset into the per-command inline scatterlist. The bounds check admits any offset with off + len <= inline_data_size, but the mapping still assumes the data begins in the first inline page: sg->offset = off; sg->length = min_t(int, len, PAGE_SIZE - off); When a port is configured with inline_data_size > PAGE_SIZE (settable up to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size] makes "PAGE_SIZE - off" underflow, so sg->length is set to

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  8. CVE-2026-72126

    Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления

    can: isotp: use unconditional synchronize_rcu() in isotp_release()

    In the Linux kernel, the following vulnerability has been resolved: can: isotp: use unconditional synchronize_rcu() in isotp_release() isotp_notify() unregisters the (RCU) CAN filters via can_rx_unregister() and clears so->bound without waiting for a grace period. isotp_release() uses so->bound to decide whether it needs to call synchronize_rcu() before cancelling so->rxtimer, so when NETDEV_UNREGISTER runs first it skips that synchronize_rcu() and can cancel the timer while an in-flight isotp_rcv() is still executing and about to re-arm it via isotp_send_fc(), leading to a use-after-free timer callback on the freed socket. sakisho-bot rem

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  9. CVE-2026-72125

    Высокий · CVSS 7.8EPSS 0,16%Нет опубликованного исправления

    can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER

    In the Linux kernel, the following vulnerability has been resolved: can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER isotp_release() looked up the bound network device via dev_get_by_index() using the stored ifindex. During device unregistration the device is unlisted from the ifindex hash before the NETDEV_UNREGISTER notifier chain runs, so a concurrent isotp_release() could find no device, skip can_rx_unregister() entirely, and still proceed to free the socket. Since isotp_release() had already removed itself from the isotp notifier list at that point, isotp_notify() would never get a chance to clean up either, leavin

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  10. CVE-2026-72124

    Высокий · CVSS 8.8EPSS 0,35%Нет опубликованного исправления

    can: isotp: serialize TX state transitions under so->rx_lock

    In the Linux kernel, the following vulnerability has been resolved: can: isotp: serialize TX state transitions under so->rx_lock The TX state machine (so->tx.state) is driven from three contexts: sendmsg() claiming and progressing a transfer, the RX path consuming Flow Control/echo frames, and two hrtimers timing out a stalled transfer. Mixing a lock-free cmpxchg() claim in sendmsg() with hrtimer_cancel() calls made under so->rx_lock elsewhere left windows where a frame or timer callback could act on a state that had already moved on, corrupting an unrelated transfer. so->rx_lock now covers the full lifecycle of a TX claim: sendmsg() takes

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  11. CVE-2026-72123

    Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления

    can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF

    In the Linux kernel, the following vulnerability has been resolved: can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF Commit f1b4e32aca08 ("can: bcm: use call_rcu() instead of costly synchronize_rcu()") replaced synchronize_rcu() in bcm_delete_rx_op() with call_rcu() and introduced the RX_NO_AUTOTIMER flag. However, this flag check was omitted for thrtimer in the packet rx fast-path. During BCM RX operation teardown, a concurrent RCU reader (bcm_rx_handler) can race and re-arm thrtimer via bcm_rx_update_and_send() after call_rcu() has been scheduled. Once the RCU grace period elapses, bcm_op is freed. The subsequently f

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  12. CVE-2026-72122

    Высокий · CVSS 7.3EPSS 0,16%Нет опубликованного исправления

    can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure

    In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all mutate both fields under that same lock. Because the lockless reads and the locked writes are unordered with respect to each other, a racing bcm_notify() (device unregister) or bcm_connect() (concurrent bind on another thread sharing the socket) can make bcm_sendmsg() observe an inconsistent combination, e.g. a stale bound=1 together with the now-cleared ifindex=0, silent

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  13. CVE-2026-72118

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    can: bcm: fix CAN frame rx/tx statistics

    In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix CAN frame rx/tx statistics KCSAN detected a data race within the bcm_rx_handler() when two CAN frames have been simultaneously received and processed in a single rx op by two different CPUs. Use atomic operations with (signed) long data types to access the statistics in the hot path to fix the KCSAN complaint. Additionally simplify the update and check of statistics overflow by using the atomic operations in separate bcm_update_[rx|tx]_stats() functions. The rx variant runs under bcm_rx_update_lock to prevent races when resetting the two rx counters; the tx

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  14. CVE-2026-72117

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler()

    In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler() For an rx op subscribed on all interfaces (ifindex == 0), the same op is registered once in the shared per-netns wildcard filter list, so bcm_rx_handler() can run concurrently on different CPUs for frames arriving on different net devices. op->rx_stamp and op->rx_ifindex were written before bcm_rx_update_lock was taken, allowing concurrent writers to race each other - including a torn store of the 64-bit rx_stamp on 32-bit platforms. Beyond a torn store bcm_send_to_user() must report the timestamp/ifindex

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  15. CVE-2026-72116

    Высокий · CVSS 7.1EPSS 0,19%Нет опубликованного исправления

    can: bcm: fix stale rx/tx ops after device removal

    In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix stale rx/tx ops after device removal RX: an RX_SETUP update(!) for an existing op skipped can_rx_register() unconditionally, even when a concurrent NETDEV_UNREGISTER had already torn down its registration (op->rx_reg_dev == NULL). This silently did not re-enable frame delivery for that updated filter. bcm_rx_setup() now re-registers in that case, while leaving rx_ops with ifindex = 0 (all CAN devices) which never carry a tracked rx_reg_dev registered as-is. TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving tx_ops with an active cyclic tra

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  16. CVE-2026-72115

    Высокий · CVSS 8.1EPSS 0,3%Нет опубликованного исправления

    can: bcm: track a single source interface for ANYDEV timeout/throttle ops

    In the Linux kernel, the following vulnerability has been resolved: can: bcm: track a single source interface for ANYDEV timeout/throttle ops An ANYDEV rx op (ifindex == 0) with an active RX timeout and/or throttle timer has no defined semantics when matching frames arrive from several interfaces: bcm_rx_handler() can run concurrently for the same op on different CPUs, racing hrtimer_cancel()/ bcm_rx_starttimer() against bcm_rx_timeout_handler() and causing spurious RX_TIMEOUT notifications and last_frames corruption. The same concurrency lets throttled multiplex frames from different interfaces clobber the single rx_ifindex/rx_stamp fields

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  17. CVE-2026-72114

    Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления

    can: bcm: validate frame length in bcm_rx_setup() for RTR replies

    In the Linux kernel, the following vulnerability has been resolved: can: bcm: validate frame length in bcm_rx_setup() for RTR replies bcm_tx_setup() validates cf->len against the CAN/CAN FD DLC limits before installing frames for TX_SETUP, but bcm_rx_setup() never did the same for the RTR-reply frame configured via RX_SETUP with RX_RTR_FRAME.

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  18. CVE-2026-72113

    Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления

    can: bcm: add missing device refcount for CAN filter removal

    In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing device refcount for CAN filter removal sashiko-bot remarked a problem with a concurrent device unregistration in isotp.c which also is present in the bcm.c code. A former fix for raw.c commit c275a176e4b6 ("can: raw: add missing refcount for memory leak fix") introduced a netdevice_tracker which solves the issue for bcm.c too. bcm_release(), bcm_delete_rx_op() and bcm_notifier() relied on dev_get_by_index(ifindex) to re-find the device for an rx_op before unregistering its filter. If a concurrent NETDEV_UNREGISTER has already unlisted the device from

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  19. CVE-2026-72110

    Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления

    bpf,fork: wipe ->bpf_storage before bailouts that access it

    In the Linux kernel, the following vulnerability has been resolved: bpf,fork: wipe ->bpf_storage before bailouts that access it Currently, copy_process() can bail out to free_task() before p->bpf_storage has been initialized, with this call graph (shown here for the !CONFIG_MEMCG case): copy_process dup_task_struct arch_dup_task_struct [copies the entire task_struct, including ->bpf_storage member] [RLIMIT_NPROC check fails] delayed_free_task free_task bpf_task_storage_free rcu_dereference(task->bpf_storage) bpf_local_storage_destroy In this case, the nascent task's ->bpf_storage member that bpf_l

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

  20. CVE-2026-72109

    Высокий · CVSS 7.8EPSS 0,16%Нет опубликованного исправления

    net: sparx5: unregister blocking notifier on init failure

    In the Linux kernel, the following vulnerability has been resolved: net: sparx5: unregister blocking notifier on init failure sparx5_register_notifier_blocks() registers the switchdev blocking notifier before allocating the ordered workqueue. If the workqueue allocation fails, the error path unregisters the switchdev and netdevice notifiers, but leaves the blocking notifier registered. Add a separate error label for the workqueue allocation failure path and unregister the switchdev blocking notifier there.

    linux-fipsОперационные системы
    Опубликовано Обновлено
    Исходное сообщение 1 ↗Исходное сообщение 2 ↗Исходное сообщение 3 ↗

Проверьте свой сервер

Сопоставьте установленный стек и версии со свежими базами уязвимостей.

Проверьте свой сервер →