Уязвимости linux-aws-fips · Страница 153

usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb() The block_len read from the host-supplied NTB header is checked against ntb_max but has no lower bound. When block_len is smaller than opts->ndp_size, the bounds check of: ndp_index > (block_len - opts->ndp_size) will underflow producing a huge unsigned value that ndp_index can never exceed, defeating the check entirely. The same underflow occurs in the datagram index checks against block_len - opts->dpe_size. With those checks neutered, a malicious USB host can choose ndp_index and datagram offsets that

usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete() A broken/bored/mean USB host can overflow the skb_shared_info->frags[] array on a Linux gadget exposing a Phonet function by sending an unbounded sequence of full-page OUT transfers. pn_rx_complete() finalizes the skb only when req->actual < req->length, where req->length is set to PAGE_SIZE by the gadget. If the host always sends exactly PAGE_SIZE bytes per transfer, fp->rx.skb will never be reset and each completion will add another fragment via skb_add_rx_frag(). Once nr_frags exceeds MAX_SKB_FRAGS (d

usb: gadget: renesas_usb3: validate endpoint index in standard request handlers

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: renesas_usb3: validate endpoint index in standard request handlers The GET_STATUS and SET/CLEAR_FEATURE handlers extract the endpoint number from the host-supplied wIndex without any sort of validation. Fix this up by validating the number of endpoints actually match up with the number the device has before attempting to dereference a pointer based on this math. This is just like what was done in commit ee0d382feb44 ("usb: gadget: aspeed_udc: validate endpoint index for ast udc") for the aspeed driver.

usbip: validate number_of_packets in usbip_pack_ret_submit()

In the Linux kernel, the following vulnerability has been resolved: usbip: validate number_of_packets in usbip_pack_ret_submit() When a USB/IP client receives a RET_SUBMIT response, usbip_pack_ret_submit() unconditionally overwrites urb->number_of_packets from the network PDU. This value is subsequently used as the loop bound in usbip_recv_iso() and usbip_pad_iso() to iterate over urb->iso_frame_desc[], a flexible array whose size was fixed at URB allocation time based on the *original* number_of_packets from the CMD_SUBMIT. A malicious USB/IP server can set number_of_packets in the response to a value larger than what was originally submi

• Обновитесь до 5.4.0-1161.172+fips1

usb: gadget: f_hid: don't call cdev_init while cdev in use

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_hid: don't call cdev_init while cdev in use When calling unbind, then bind again, cdev_init reinitialized the cdev, even though there may still be references to it. That's the case when the /dev/hidg* device is still opened. This obviously unsafe behavior like oopes. This fixes this by using cdev_alloc to put the cdev on the heap. That way, we can simply allocate a new one in hidg_bind.

fbdev: udlfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO

In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO Much like commit 19f953e74356 ("fbdev: fb_pm2fb: Avoid potential divide by zero error"), we also need to prevent that same crash from happening in the udlfb driver as it uses pixclock directly when dividing, which will crash.

staging: sm750fb: fix division by zero in ps_to_hz()

In the Linux kernel, the following vulnerability has been resolved: staging: sm750fb: fix division by zero in ps_to_hz() ps_to_hz() is called from hw_sm750_crtc_set_mode() without validating that pixclock is non-zero. A zero pixclock passed via FBIOPUT_VSCREENINFO causes a division by zero. Fix by rejecting zero pixclock in lynxfb_ops_check_var(), consistent with other framebuffer drivers.

ALSA: ctxfi: Limit PTP to a single page

In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Limit PTP to a single page Commit 391e69143d0a increased CT_PTP_NUM from 1 to 4 to support 256 playback streams, but the additional pages are not used by the card correctly. The CT20K2 hardware already has multiple VMEM_PTPAL registers, but using them separately would require refactoring the entire virtual memory allocation logic. ct_vm_map() always uses PTEs in vm->ptp[0].area regardless of CT_PTP_NUM. On AMD64 systems, a single PTP covers 512 PTEs (2M). When aggregate memory allocations exceed this limit, ct_vm_map() tries to access beyond the allocated spac

ocfs2: fix possible deadlock between unlink and dio_end_io_write

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix possible deadlock between unlink and dio_end_io_write ocfs2_unlink takes orphan dir inode_lock first and then ip_alloc_sem, while in ocfs2_dio_end_io_write, it acquires these locks in reverse order. This creates an ABBA lock ordering violation on lock classes ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE] and ocfs2_file_ip_alloc_sem_key. Lock Chain #0 (orphan dir inode_lock -> ip_alloc_sem): ocfs2_unlink ocfs2_prepare_orphan_dir ocfs2_lookup_lock_orphan_dir inode_lock(orphan_dir_inode) <- lock A __ocfs2_prepare_orphan_dir ocfs2_prepare_dir

ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY filemap_fault() may drop the mmap_lock before returning VM_FAULT_RETRY, as documented in mm/filemap.c: "If our return value has VM_FAULT_RETRY set, it's because the mmap_lock may be dropped before doing I/O or by lock_folio_maybe_drop_mmap()." When this happens, a concurrent munmap() can call remove_vma() and free the vm_area_struct via RCU. The saved 'vma' pointer in ocfs2_fault() then becomes a dangling pointer, and the subsequent trace_ocfs2_fault() call dereferences it -- a use-after-free. Fix this by

ocfs2: handle invalid dinode in ocfs2_group_extend

In the Linux kernel, the following vulnerability has been resolved: ocfs2: handle invalid dinode in ocfs2_group_extend [BUG] kernel BUG at fs/ocfs2/resize.c:308! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_group_extend+0x10aa/0x1ae0 fs/ocfs2/resize.c:308 Code: 8b8520ff ffff83f8 860f8580 030000e8 5cc3c1fe Call Trace: ... ocfs2_ioctl+0x175/0x6e0 fs/ocfs2/ioctl.c:869 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583 x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/

KVM: SEV: Protect *all* of sev_mem_enc_register_region() with kvm->lock

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Protect *all* of sev_mem_enc_register_region() with kvm->lock Take and hold kvm->lock for before checking sev_guest() in sev_mem_enc_register_region(), as sev_guest() isn't stable unless kvm->lock is held (or KVM can guarantee KVM_SEV_INIT{2} has completed and can't rollack state). If KVM_SEV_INIT{2} fails, KVM can end up trying to add to a not-yet-initialized sev->regions_list, e.g. triggering a #GP Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000

KVM: x86: Use scratch field in MMIO fragment to hold small write values

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Use scratch field in MMIO fragment to hold small write values When exiting to userspace to service an emulated MMIO write, copy the to-be-written value to a scratch field in the MMIO fragment if the size of the data payload is 8 bytes or less, i.e. can fit in a single chunk, instead of pointing the fragment directly at the source value. This fixes a class of use-after-free bugs that occur when the emulator initiates a write using an on-stack, local variable as the source, the write splits a page boundary, *and* both pages are MMIO pages. Because KVM's ABI only a

mm: blk-cgroup: fix use-after-free in cgwb_release_workfn()

In the Linux kernel, the following vulnerability has been resolved: mm: blk-cgroup: fix use-after-free in cgwb_release_workfn() cgwb_release_workfn() calls css_put(wb->blkcg_css) and then later accesses wb->blkcg_css again via blkcg_unpin_online(). If css_put() drops the last reference, the blkcg can be freed asynchronously (css_free_rwork_fn -> blkcg_css_free -> kfree) before blkcg_unpin_online() dereferences the pointer to access blkcg->online_pin, resulting in a use-after-free: BUG: KASAN: slab-use-after-free in blkcg_unpin_online (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/ref

media: em28xx: fix use-after-free in em28xx_v4l2_open()

In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix use-after-free in em28xx_v4l2_open() em28xx_v4l2_open() reads dev->v4l2 without holding dev->lock, creating a race with em28xx_v4l2_init()'s error path and em28xx_v4l2_fini(), both of which free the em28xx_v4l2 struct and set dev->v4l2 to NULL under dev->lock. This race leads to two issues: - use-after-free in v4l2_fh_init() when accessing vdev->ctrl_handler, since the video_device is embedded in the freed em28xx_v4l2 struct. - NULL pointer dereference in em28xx_resolution_set() when accessing v4l2->norm, since dev->v4l2 has been set to NULL. Fi

ALSA: 6fire: fix use-after-free on disconnect

In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: fix use-after-free on disconnect In usb6fire_chip_abort(), the chip struct is allocated as the card's private data (via snd_card_new with sizeof(struct sfire_chip)). When snd_card_free_when_closed() is called and no file handles are open, the card and embedded chip are freed synchronously. The subsequent chip->card = NULL write then hits freed slab memory. Call trace: usb6fire_chip_abort sound/usb/6fire/chip.c:59 [inline] usb6fire_chip_disconnect+0x348/0x358 sound/usb/6fire/chip.c:182 usb_unbind_interface+0x1a8/0x88c drivers/usb/core/driver.c:458 ...

bcache: fix cached_dev.sb_bio use-after-free and crash

In the Linux kernel, the following vulnerability has been resolved: bcache: fix cached_dev.sb_bio use-after-free and crash In our production environment, we have received multiple crash reports regarding libceph, which have caught our attention: ``` [6888366.280350] Call Trace: [6888366.280452] blk_update_request+0x14e/0x370 [6888366.280561] blk_mq_end_request+0x1a/0x130 [6888366.280671] rbd_img_handle_request+0x1a0/0x1b0 [rbd] [6888366.280792] rbd_obj_handle_request+0x32/0x40 [rbd] [6888366.280903] __complete_request+0x22/0x70 [libceph] [6888366.281032] osd_dispatch+0x15e/0xb40 [libceph] [6888366.281164] ? inet_recvmsg+0x5b/0xd0 [6

media: as102: fix to not free memory after the device is registered in as102_usb_probe()

In the Linux kernel, the following vulnerability has been resolved: media: as102: fix to not free memory after the device is registered in as102_usb_probe() In as102_usb driver, the following race condition occurs: ``` CPU0 CPU1 as102_usb_probe() kzalloc(); // alloc as102_dev_t .... usb_register_dev(); fd = sys_open("/path/to/dev"); // open as102 fd .... usb_deregister_dev(); .... kfree(); // free as102_dev_t .... sys_close(fd); as102_release() // UAF!! as102_usb_release() kfree(); // DFB!! ``` When a USB character device registered with usb_register_dev() is later unregi

nilfs2: fix NULL i_assoc_inode dereference in nilfs_mdt_save_to_shadow_map

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix NULL i_assoc_inode dereference in nilfs_mdt_save_to_shadow_map The DAT inode's btree node cache (i_assoc_inode) is initialized lazily during btree operations. However, nilfs_mdt_save_to_shadow_map() assumes i_assoc_inode is already initialized when copying dirty pages to the shadow map during GC. If NILFS_IOCTL_CLEAN_SEGMENTS is called immediately after mount before any btree operation has occurred on the DAT inode, i_assoc_inode is NULL leading to a general protection fault. Fix this by calling nilfs_attach_btree_node_cache() on the DAT inode in nilfs_dat_rea

media: hackrf: fix to not free memory after the device is registered in hackrf_probe()

In the Linux kernel, the following vulnerability has been resolved: media: hackrf: fix to not free memory after the device is registered in hackrf_probe() In hackrf driver, the following race condition occurs: ``` CPU0 CPU1 hackrf_probe() kzalloc(); // alloc hackrf_dev .... v4l2_device_register(); .... fd = sys_open("/path/to/dev"); // open hackrf fd .... v4l2_device_unregister(); .... kfree(); // free hackrf_dev .... sys_ioctl(fd, ...); v4l2_ioctl(); video_is_registered() // UAF!! .... sys_close(fd); v4l2_release() // UAF!! hackrf_video_release()