p PatchFirst

PatchFirst · Свежие уязвимости

Уязвимости linux-fips · Страница 74

За последние 30 дней в linux-fips опубликовано уязвимостей: 519; в каталоге KEV: 0.

Фильтры уязвимостей
Сбросить фильтры

Уязвимостей: 8606

  1. CVE-2026-80597

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    mtd: maps: vmu-flash: fix NULL pointer dereference in initialization

    In the Linux kernel, the following vulnerability has been resolved: mtd: maps: vmu-flash: fix NULL pointer dereference in initialization The mtd_info contains a struct device, which must be linked to its parent. Without this, the initialization of the MTD fails with a NULL pointer dereference.

    Опубликовано Обновлено
  2. CVE-2026-80595

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    Input: ims-pcu - add response length checks

    In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - add response length checks The driver processes response data from device buffers without verifying that the device actually sent enough data. This can lead to out-of-bounds reads or processing stale data. Add checks for the expected response length before accessing the buffers.

    Опубликовано Обновлено
  3. CVE-2026-80594

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    Input: ims-pcu - fix potential infinite loop in CDC union descriptor parsing

    In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix potential infinite loop in CDC union descriptor parsing The driver parses CDC union descriptors in ims_pcu_get_cdc_union_desc() by iterating through the extra descriptor data. However, it does not verify that the bLength of each descriptor is at least 2. A malicious device could provide a descriptor with bLength = 0, leading to an infinite loop in the driver. Add a check to ensure bLength is at least 2 before proceeding with parsing.

    Опубликовано Обновлено
  4. CVE-2026-80593

    Высокий · CVSS 8.4EPSS 0,2%Нет опубликованного исправления

    hwmon: (asus_atk0110) Check package count before accessing element

    In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus_atk0110) Check package count before accessing element atk_ec_present() walks the management group package returned by the GGRP ACPI method and, for each sub-package, reads its first element: id = &obj->package.elements[0]; if (id->type != ACPI_TYPE_INTEGER) without checking that the sub-package is non-empty. ACPICA allocates the element array with exactly package.count entries, so for a sub-package with a zero count this reads past the allocation. The sibling function atk_debugfs_ggrp_open() performs the same access but skips empty packages with a package

    Опубликовано Обновлено
  5. CVE-2026-80591

    Высокий · CVSS 7.8EPSS 0,18%Нет опубликованного исправления

    f2fs: fix listxattr handling of corrupted xattr entries

    In the Linux kernel, the following vulnerability has been resolved: f2fs: fix listxattr handling of corrupted xattr entries Validate the xattr entry before reading its fields in f2fs_listxattr(). Return -EFSCORRUPTED when the entry is outside the valid xattr storage area instead of returning a successful partial result.

    Опубликовано Обновлено
  6. CVE-2026-80590

    Высокий · CVSS 8.6EPSS 0,58%Нет опубликованного исправления

    inet: frags: strip GSO state from fragments before reassembly

    In the Linux kernel, the following vulnerability has been resolved: inet: frags: strip GSO state from fragments before reassembly A virtio_net_hdr (tun/tap, or AF_PACKET with PACKET_VNET_HDR) can mark an IPv4 or IPv6 fragment as GSO; nothing relates gso_type to frag_off. inet_frag_reasm_prepare()/inet_frag_reasm_finish() keep the first fragment's skb as the head of the reassembled datagram, including its shinfo->gso_size/gso_type/gso_segs, and chain the remaining fragments on frag_list with whatever linear/paged layout they arrived with. After ip_defrag() (ip_local_deliver(), nf_defrag_ipv4, ...) the reassembled skb therefore still claims

    Опубликовано Обновлено
  7. CVE-2026-80584

    Высокий · CVSS 8.4EPSS 0,2%Нет опубликованного исправления

    s390/qeth: validate user buffer length in SNMP and ARP query ioctls

    In the Linux kernel, the following vulnerability has been resolved: s390/qeth: validate user buffer length in SNMP and ARP query ioctls qeth_snmp_command() and qeth_l3_arp_query() allocate a buffer sized by a user-supplied length (udata_len) without checking a lower bound, then set udata_offset to a fixed non-zero value and pass both to a reply callback. The callback bounds-checks the copy with if ((udata_len - udata_offset) < len) Both fields are u32, so a udata_len smaller than udata_offset makes the subtraction wrap and the check pass, and the following memcpy() writes past the allocation. A udata_len of 0 also yields ZERO_SIZE

    Опубликовано Обновлено
  8. CVE-2026-80580

    Высокий · CVSS 7.8EPSS 0,11%Нет опубликованного исправления

    fbdev: bound mode sysfs output to the sysfs buffer

    In the Linux kernel, the following vulnerability has been resolved: fbdev: bound mode sysfs output to the sysfs buffer mode_string() uses snprintf() which can return a value larger than the remaining buffer space. show_modes() accumulates the return value into i without checking whether i has reached PAGE_SIZE, causing the offset to advance past the sysfs buffer if the modelist is long enough. Add a size parameter to mode_string() and use scnprintf() to return only the bytes actually written. Add an early return when offset already exceeds the buffer. In show_modes(), stop accumulating once the buffer is full.

    Опубликовано Обновлено
  9. CVE-2026-80579

    Высокий · CVSS 7.8EPSS 0,11%Нет опубликованного исправления

    fbdev: clear fb_info->mode before deleting a videomode

    In the Linux kernel, the following vulnerability has been resolved: fbdev: clear fb_info->mode before deleting a videomode fb_set_var() can delete a mode from info->modelist when userspace passes FB_ACTIVATE_INV_MODE through FBIOPUT_VSCREENINFO. The code checks that the mode being deleted is not the current info->var and that fbcon is not using it, but it does not check fb_info->mode. fb_info->mode may still point into the modelist entry being deleted. If the entry is freed, later mode sysfs reads through show_mode() can dereference a stale pointer. Clear fb_info->mode before calling fb_delete_videomode() when it matches the mode being re

    Опубликовано Обновлено
  10. CVE-2026-80576

    Высокий · CVSS 8.8EPSS 0,12%Нет опубликованного исправления

    drm/amdgpu: reject oversized IBs with per-ring packet limits

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: reject oversized IBs with per-ring packet limits On GFX rings, amdgpu_cs_p2_ib() passed user-supplied ib_bytes through to ib->length_dw without a limit, while ring_emit_ib() encodes length into packet fields. Oversized values can corrupt adjacent control bits and destabilize command submission. Add a per-ring IB packet size limit helper and reject command submissions exceeding the corresponding dword limit before IB allocation. Use the documented 20-bit limit for GFX/compute/SDMA/VPE, and apply the MM fallback limit for other ring types. (cherry picked from co

    Опубликовано Обновлено
  11. CVE-2026-80574

    Высокий · CVSS 8.4EPSS 0,13%Нет опубликованного исправления

    Input: focaltech - fix array out-of-bounds in focaltech_process_rel_packet

    In the Linux kernel, the following vulnerability has been resolved: Input: focaltech - fix array out-of-bounds in focaltech_process_rel_packet Make finger2 (and also finger1) unsigned, so that if the finger index in the packet is 0 then subtracting 1 creates an array index which overflows above the existing check for FOC_MAX_FINGERS, as the existing comment says it should, instead of writing to state->fingers[-1].

    Опубликовано Обновлено
  12. CVE-2026-80573

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    Input: iforce - validate input packet lengths

    In the Linux kernel, the following vulnerability has been resolved: Input: iforce - validate input packet lengths iforce_process_packet() reads fixed fields from joystick, wheel and status packets without first checking their lengths. In particular, the shared hats-and-buttons helper unconditionally reads data[6]. The status tail is a sequence of 16-bit effect addresses, but an incomplete final address is also consumed. A successful zero-length USB URB additionally reads the packet ID before the common parser is called. Reject the zero-length USB transfer, require the seven-byte joystick and wheel prefixes and the two-byte status prefix, a

    Опубликовано Обновлено
  13. CVE-2026-80572

    Высокий · CVSS 7.8EPSS 0,12%Нет опубликованного исправления

    Input: byd - synchronize timer deletion before freeing private data

    In the Linux kernel, the following vulnerability has been resolved: Input: byd - synchronize timer deletion before freeing private data byd_disconnect() uses timer_delete() before freeing the driver's private data. This does not wait for a running byd_clear_touch() callback, which dereferences the private data and its psmouse pointer. A callback racing with disconnect can therefore access the private data after it has been freed. The timer can also still be re-armed by byd_process_byte() while the disconnect is in progress. Use timer_shutdown_sync() before freeing the private data: it waits for a running callback and turns any later re-

    Опубликовано Обновлено
  14. CVE-2026-80570

    Высокий · CVSS 7.8EPSS 0,14%Нет опубликованного исправления

    Input: synaptics-rmi4 - zero report size on F54 work error

    In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - zero report size on F54 work error In rmi_f54_work(), if an error occurs during report request or command verification, the code jumped directly to the 'error' label, bypassing the 'abort' label where f54->report_size was normally zeroed out. This left f54->report_size containing its previous successful payload size. If a user then altered the V4L2 format to a smaller size, and a subsequent run failed, rmi_f54_buffer_queue() would copy the stale, larger payload size into the shrunken V4L2 buffer, causing a heap buffer overflow. Fix this by merging

    Опубликовано Обновлено
  15. CVE-2026-80569

    Высокий · CVSS 7.8EPSS 0,12%Нет опубликованного исправления

    Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer

    In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer rmi_f54_work() reads a diagnostics report from the device into f54->report_data, sizing the transfer with rmi_f54_get_report_size(): report_size = rmi_f54_get_report_size(f54); ... for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) { int size = min(F54_REPORT_DATA_SIZE, report_size - i); ... rmi_read_block(.., f54->report_data + i, size); } report_data is allocated once at probe from F54's own electrode counts (array3_size(f54->num_tx_electrodes, f54->num_rx_electrodes, sizeof(u16))),

    Опубликовано Обновлено
  16. CVE-2026-80568

    Высокий · CVSS 7.8EPSS 0,19%Нет опубликованного исправления

    Input: synaptics-rmi4 - block s_input when F54 queue is busy

    In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - block s_input when F54 queue is busy Changing the input (diagnostic report type) mid-stream changes the report size. Since V4L2 buffers are allocated based on the size at stream start, changing the input while streaming could lead to a heap buffer overflow if the new size is larger than the allocated buffers. Prevent this by blocking VIDIOC_S_INPUT with -EBUSY if the V4L2 queue is busy (streaming).

    Опубликовано Обновлено
  17. CVE-2026-80567

    Без оценкиEPSS 0,17%Нет опубликованного исправления

    Input: synaptics-rmi4 - propagate F54 worker errors to V4L2 queue

    In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - propagate F54 worker errors to V4L2 queue Previously, rmi_f54_buffer_queue() waited for the worker thread to finish but ignored whether it succeeded. If the worker failed (e.g., due to a timeout or register read failure), the queue thread would silently return success, delivering stale or uninitialized memory to userspace. Add a 'report_error' field to struct f54_data to store the worker's exit status. Check this field in rmi_f54_buffer_queue() after the worker finishes, and mark the buffer as VB2_BUF_STATE_ERROR if an error occurred.

    Опубликовано Обновлено
  18. CVE-2026-80565

    Высокий · CVSS 7.8EPSS 0,18%Нет опубликованного исправления

    crypto: qce - fix error path in devm_qce_register_algs

    In the Linux kernel, the following vulnerability has been resolved: crypto: qce - fix error path in devm_qce_register_algs If ops->register_algs() fails, the error path repeatedly calls the same ops->unregister_algs() from the failed registration. Use the loop index to unregister the previously registered algorithms instead.

    Опубликовано Обновлено
  19. CVE-2026-80562

    Без оценкиEPSS 0,22%Нет опубликованного исправления

    gpio: ml-ioh: use raw_spinlock_t for the register lock

    In the Linux kernel, the following vulnerability has been resolved: gpio: ml-ioh: use raw_spinlock_t for the register lock ioh_irq_type() is registered as the irq_chip .irq_set_type callback and takes chip->spinlock with spin_lock_irqsave(). This callback is reached from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled. That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is an rtmutex-backed sleeping lock, so acquiring it there is invalid. ioh_irq_enable() and ioh_irq_disable() take the same lock from the .irq_enable/.irq_disable callb

    Опубликовано Обновлено
  20. CVE-2026-80561

    Критический · CVSS 9.8EPSS 0,51%Нет опубликованного исправления

    libceph: fix multiple unsafe decodes in decode_locker()

    In the Linux kernel, the following vulnerability has been resolved: libceph: fix multiple unsafe decodes in decode_locker() decode_locker() in cls_lock_client.c contains three unsafe decode operations that allow a malicious or compromised OSD to trigger slab-out-of-bounds reads: 1. ceph_decode_copy() at the locker_id_t name field has no preceding bounds check. With p == end after ceph_start_decoding() accepts struct_len=0, this reads sizeof(ceph_entity_name) = 9 bytes past the validated buffer boundary. 2. *p += sizeof(struct ceph_timespec) after the locker_info_t header is an unchecked pointer advance. A malicious OSD can pos

    Опубликовано Обновлено

Проверьте свой сервер

Сопоставьте установленный стек и версии со свежими базами уязвимостей.

Проверьте свой сервер →