Уязвимости linux-gcp-fips · Страница 148

xfs: close crash window in attr dabtree inactivation

In the Linux kernel, the following vulnerability has been resolved: xfs: close crash window in attr dabtree inactivation When inactivating an inode with node-format extended attributes, xfs_attr3_node_inactive() invalidates all child leaf/node blocks via xfs_trans_binval(), but intentionally does not remove the corresponding entries from their parent node blocks. The implicit assumption is that xfs_attr_inactive() will truncate the entire attr fork to zero extents afterwards, so log recovery will never reach the root node and follow those stale pointers. However, if a log shutdown occurs after the leaf/node block cancellations commit but

wifi: mac80211: check tdls flag in ieee80211_tdls_oper

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check tdls flag in ieee80211_tdls_oper When NL80211_TDLS_ENABLE_LINK is called, the code only checks if the station exists but not whether it is actually a TDLS station. This allows the operation to proceed for non-TDLS stations, causing unintended side effects like modifying channel context and HT protection before failing. Add a check for sta->sta.tdls early in the ENABLE_LINK case, before any side effects occur, to ensure the operation is only allowed for actual TDLS peers.

HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq The wacom_intuos_bt_irq() function processes Bluetooth HID reports without sufficient bounds checking. A maliciously crafted short report can trigger an out-of-bounds read when copying data into the wacom structure. Specifically, report 0x03 requires at least 22 bytes to safely read the processed data and battery status, while report 0x04 (which falls through to 0x03) requires 32 bytes. Add explicit length checks for these report IDs and log a warning if a short report is received.

atm: lec: fix use-after-free in sock_def_readable()

In the Linux kernel, the following vulnerability has been resolved: atm: lec: fix use-after-free in sock_def_readable() A race condition exists between lec_atm_close() setting priv->lecd to NULL and concurrent access to priv->lecd in send_to_lecd(), lec_handle_bridge(), and lec_atm_send(). When the socket is freed via RCU while another thread is still using it, a use-after-free occurs in sock_def_readable() when accessing the socket's wait queue. The root cause is that lec_atm_close() clears priv->lecd without any synchronization, while callers dereference priv->lecd without any protection against concurrent teardown. Fix this by converti

HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure

In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure Presently, if the force feedback initialisation fails when probing the Logitech G920 Driving Force Racing Wheel for Xbox One, an error number will be returned and propagated before the userspace infrastructure (sysfs and /dev/input) has been torn down. If userspace ignores the errors and continues to use its references to these dangling entities, a UAF will promptly follow. We have 2 options; continue to return the error, but ensure that all of the infrastructure is torn down accordingly

HID: core: Mitigate potential OOB by removing bogus memset()

In the Linux kernel, the following vulnerability has been resolved: HID: core: Mitigate potential OOB by removing bogus memset() The memset() in hid_report_raw_event() has the good intention of clearing out bogus data by zeroing the area from the end of the incoming data string to the assumed end of the buffer. However, as we have previously seen, doing so can easily result in OOB reads and writes in the subsequent thread of execution. The current suggestion from one of the HID maintainers is to remove the memset() and simply return if the incoming event buffer size is not large enough to fill the associated report. Suggested-by Benjamin

HID: multitouch: Check to ensure report responses match the request

In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: Check to ensure report responses match the request It is possible for a malicious (or clumsy) device to respond to a specific report's feature request using a completely different report ID. This can cause confusion in the HID core resulting in nasty side-effects such as OOB writes. Add a check to ensure that the report ID in the response, matches the one that was requested. If it doesn't, omit reporting the raw event and return early.

btrfs: reject root items with drop_progress and zero drop_level

In the Linux kernel, the following vulnerability has been resolved: btrfs: reject root items with drop_progress and zero drop_level [BUG] When recovering relocation at mount time, merge_reloc_root() and btrfs_drop_snapshot() both use BUG_ON(level == 0) to guard against an impossible state: a non-zero drop_progress combined with a zero drop_level in a root_item, which can be triggered: ------------[ cut here ]------------ kernel BUG at fs/btrfs/relocation.c:1545! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 283 ... Tainted: 6.18.0+ #16 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU

crypto: af-alg - fix NULL pointer dereference in scatterwalk

In the Linux kernel, the following vulnerability has been resolved: crypto: af-alg - fix NULL pointer dereference in scatterwalk The AF_ALG interface fails to unmark the end of a Scatter/Gather List (SGL) when chaining a new af_alg_tsgl structure. If a sendmsg() fills an SGL exactly to MAX_SGL_ENTS, the last entry is marked as the end. A subsequent sendmsg() allocates a new SGL and chains it, but fails to clear the end marker on the previous SGL's last data entry. This causes the crypto scatterwalk to hit a premature end, returning NULL on sg_next() and leading to a kernel panic during dereference. Fix this by explicitly unmarking the end

mpls: add seqcount to protect the platform_label{,s} pair

In the Linux kernel, the following vulnerability has been resolved: mpls: add seqcount to protect the platform_label{,s} pair The RCU-protected codepaths (mpls_forward, mpls_dump_routes) can have an inconsistent view of platform_labels vs platform_label in case of a concurrent resize (resize_platform_label_table, under platform_mutex). This can lead to OOB accesses. This patch adds a seqcount, so that we get a consistent snapshot. Note that mpls_label_ok is also susceptible to this, so the check against RTA_DST in rtm_to_route_config, done outside platform_mutex, is not sufficient. This value gets passed to mpls_label_ok once more in both

net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leak

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leak When processing Router Advertisements with user options the kernel builds an RTM_NEWNDUSEROPT netlink message. The nduseroptmsg struct has three padding fields that are never zeroed and can leak kernel data The fix is simple, just zeroes the padding fields.

ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach()

In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside ic

• Обновитесь до 5.4.0-1164.173+fips1

ip6_tunnel: clear skb2->cb[] in ip4ip6_err()

In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: clear skb2->cb[] in ip4ip6_err() Oskar Kjos reported the following problem. ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr value. __ip_options_echo() then reads optlen from attacker-controlled packet data at sptr[rr+1] and copies that many bytes into dopt->__data,

• Обновитесь до 5.4.0-1164.173+fips1

net: use skb_header_pointer() for TCPv4 GSO frag_off check

In the Linux kernel, the following vulnerability has been resolved: net: use skb_header_pointer() for TCPv4 GSO frag_off check Syzbot reported a KMSAN uninit-value warning in gso_features_check() called from netif_skb_features() [1]. gso_features_check() reads iph->frag_off to decide whether to clear mangleid_features. Accessing the IPv4 header via ip_hdr()/inner_ip_hdr() can rely on skb header offsets that are not always safe for direct dereference on packets injected from PF_PACKET paths. Use skb_header_pointer() for the TCPv4 frag_off check so the header read is robust whether data is already linear or needs copying. [1] https://syzka

net: sched: cls_api: fix tc_chain_fill_node to initialize tcm_info to zero to prevent an info-leak

In the Linux kernel, the following vulnerability has been resolved: net: sched: cls_api: fix tc_chain_fill_node to initialize tcm_info to zero to prevent an info-leak When building netlink messages, tc_chain_fill_node() never initializes the tcm_info field of struct tcmsg. Since the allocation is not zeroed, kernel heap memory is leaked to userspace through this 4-byte field. The fix simply zeroes tcm_info alongside the other fields that are already initialized.

crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption

In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption When decrypting data that is not in-place (src != dst), there is no need to save the high-order sequence bits in dst as it could simply be re-copied from the source. However, the data to be hashed need to be rearranged accordingly. Thanks,

• Обновитесь до 5.4.0-1162.171+fips1

netfilter: x_tables: ensure names are nul-terminated

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: ensure names are nul-terminated Reject names that lack a \0 character before feeding them to functions that expect c-strings. Fixes tag is the most recent commit that needs this change.

netfilter: nf_conntrack_helper: pass helper to expect cleanup

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_helper: pass helper to expect cleanup nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy() to remove expectations belonging to the helper being unregistered. However, it passes NULL instead of the helper pointer as the data argument, so expect_iter_me() never matches any expectation and all of them survive the cleanup. After unregister returns, nfnl_cthelper_del() frees the helper object immediately. Subsequent expectation dumps or packet-driven init_conntrack() calls then dereference the freed exp->helper, causing a use-after-free

netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent ctnetlink_alloc_expect() allocates expectations from a non-zeroing slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not present in the netlink message, saved_addr and saved_proto are never initialized. Stale data from a previous slab occupant can then be dumped to userspace by ctnetlink_exp_dump_expect(), which checks these fields to decide whether to emit CTA_EXPECT_NAT. The safe sibling nf_ct_expect_init(), used by the packet path, explicitly zeroes these fields. Zero saved_addr, saved_

netfilter: ctnetlink: ignore explicit helper on new expectations

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: ignore explicit helper on new expectations Use the existing master conntrack helper, anything else is not really supported and it just makes validation more complicated, so just ignore what helper userspace suggests for this expectation. This was uncovered when validating CTA_EXPECT_CLASS via different helper provided by userspace than the existing master conntrack helper: BUG: KASAN: slab-out-of-bounds in nf_ct_expect_related_report+0x2479/0x27c0 Read of size 4 at addr ffff8880043fe408 by task poc/102 Call Trace: nf_ct_expect_related_report