In the Linux kernel, the following vulnerability has been resolved:
sctp: drop a chunk if its transport was removed
sctp_rcv() resolves the transport once per packet and leaves it in
chunk->transport. The lookup reference, or the one sctp_add_backlog() takes
if the socket is owned by userspace, keeps it around until the chunk has
been processed.
An authenticated ASCONF DEL-IP can remove it in the meantime.
sctp_assoc_rm_peer() takes the transport out of the association and calls
sctp_transport_free(), which tags it dead and drops the reference the
association held. There is a window on both paths: the packet can sit on
the socket backlog,
Высокий · CVSS 7.5EPSS 0,5%Нет опубликованного исправления
sctp: fix NULL deref on untransmitted RECONF completion
In the Linux kernel, the following vulnerability has been resolved:
sctp: fix NULL deref on untransmitted RECONF completion
sctp_process_strreset_outreq(), sctp_process_strreset_addstrm_out() and
sctp_process_strreset_resp() complete a pending stream reconfiguration
request by stopping the reconf timer on the transport it was sent on:
t = asoc->strreset_chunk->transport;
if (timer_delete(&t->reconf_timer))
sctp_transport_put(t);
chunk->transport is assigned by __sctp_packet_append_chunk() when the
chunk is appended to an outbound packet, and sctp_outq_flush_ctrl() arms
the reconf timer at that same point. A request already published i
Высокий · CVSS 7.5EPSS 0,7%Нет опубликованного исправления
sctp: fix stream->outcnt underflow on duplicate RECONF responses
In the Linux kernel, the following vulnerability has been resolved:
sctp: fix stream->outcnt underflow on duplicate RECONF responses
A cached RECONF chunk may contain more than one request parameter. A
duplicate response can therefore find and process the same ADD_OUT request
again while another parameter is still outstanding, rolling back outcnt
twice and possibly underflowing it.
Track outstanding request types as bits and clear each bit after its first
response. Later responses for the same request are then ignored.
Без оценкиEPSS 0,22%Нет опубликованного исправления
power: supply: bq24257: fix use-after-free on remove
In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq24257: fix use-after-free on remove
The STAT-pin interrupt is devm-managed, so it stays armed until the devm
cleanup that runs after remove() returns. remove() cancels
bq->iilimit_setup_work while the threaded handler can still fire; that
handler reschedules the work and dereferences bq, so the work runs
against freed memory once devm frees bq.
Make the delayed work device-managed with devm_delayed_work_autocancel(),
registered before the interrupt request. The devm cleanup then releases
the interrupt first, so the handler can no longer reschedule the work
Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления
power: supply: charger-manager: register regulators before exposing sysfs
In the Linux kernel, the following vulnerability has been resolved:
power: supply: charger-manager: register regulators before exposing sysfs
charger_manager_remove() and the err_reg_extcon probe error path free each
charger regulator with regulator_put() before tearing down the power_supply
sysfs entries (power_supply_unregister()). charger_manager_remove() also
calls try_charger_enable(cm, false) after the regulator_put() loop. A
concurrent write to a charger's externally_control sysfs attribute that
lands between regulator_put() and power_supply_unregister() can run
charger_externally_control_store() and call try_charger_enable(), which,
Высокий · CVSS 8.4EPSS 0,14%Нет опубликованного исправления
power: supply: cros_usbpd-charger: bound the EC-reported port count
In the Linux kernel, the following vulnerability has been resolved:
power: supply: cros_usbpd-charger: bound the EC-reported port count
cros_usbpd_charger_probe() reads two port counts from the EC and uses
one of them, num_charger_ports, as the loop bound when populating a
fixed-size array:
struct port_data *ports[EC_USB_PD_MAX_PORTS]; /* 8 entries */
...
for (i = 0; i < charger->num_charger_ports; i++)
charger->ports[charger->num_registered_psy++] = port;
Both num_usbpd_ports (from EC_CMD_USB_PD_PORTS) and num_charger_ports
(from EC_CMD_CHARGE_PORT_COUNT) are u8 values reported by the EC. The
only validation is a sanity check that c
Высокий · CVSS 8.4EPSS 0,14%Нет опубликованного исправления
power: supply: cros_usbpd: Limit port counts to EC_USB_PD_MAX_PORTS
In the Linux kernel, the following vulnerability has been resolved:
power: supply: cros_usbpd: Limit port counts to EC_USB_PD_MAX_PORTS
Currently the cros_usbpd-charger driver probe iterates based on raw
charger port count returned by the embedded controller. The only check
is against the number of USB PD ports which the embedded controller
also defines. A malicious embedded controller could return an inaccurate
port count (up to 255) resulting in an out of bounds write and
subsequent memory corruption.
Update helper functions in cros_usbpd-charger to limit port counts to
EC_USB_PD_MAX_PORTS.
Высокий · CVSS 8.4EPSS 0,14%Нет опубликованного исправления
power: supply: lp8727: fix use-after-free in lp8727_release_irq()
In the Linux kernel, the following vulnerability has been resolved:
power: supply: lp8727: fix use-after-free in lp8727_release_irq()
lp8727_isr_func(), the threaded IRQ handler, is the only caller that arms
pchg->work via schedule_delayed_work(). lp8727_release_irq() currently
cancels the work before freeing the IRQ, so an IRQ delivered in between
can re-arm the work through the threaded handler. After .remove returns
the devm layer frees pchg while lp8727_delayed_func() may still run and
dereference it.
Free the IRQ first so the threaded handler is quiesced and can no longer
queue work, then cancel the delayed work to drain the final g
Без оценкиEPSS 0,17%Нет опубликованного исправления
power: supply: lp8788-charger: fix use-after-free on remove
In the Linux kernel, the following vulnerability has been resolved:
power: supply: lp8788-charger: fix use-after-free on remove
lp8788_charger_remove() flushes charger_work before unregistering the
IRQs. An IRQ thread can queue charger_work after flush_work() has
returned. The work can then run after devres frees pchg and dereference
it in lp8788_charger_event().
Unregister the IRQs first. free_irq() waits for any running threaded
handler, so no handler can queue more work afterwards. Then use
cancel_work_sync() to cancel pending work or wait for running work to
finish.
This issue was found by an in-house static analysis tool.
Высокий · CVSS 8.4EPSS 0,14%Нет опубликованного исправления
power: supply: rt9455: quiesce delayed work before teardown
In the Linux kernel, the following vulnerability has been resolved:
power: supply: rt9455: quiesce delayed work before teardown
The threaded IRQ handler can queue pwr_rdy_work,
max_charging_time_work and batt_presence_work. pwr_rdy_work and
batt_presence_work can also queue max_charging_time_work, while
batt_presence_work can requeue itself.
rt9455_remove() cancels max_charging_time_work before
batt_presence_work. The latter can therefore queue
max_charging_time_work after it has already been cancelled:
rt9455_remove() workqueue
cancel pwr_rdy_work
cancel max_charging_time_work
Без оценкиEPSS 0,17%Нет опубликованного исправления
power: supply: twl4030_charger: cancel workers via devm
In the Linux kernel, the following vulnerability has been resolved:
power: supply: twl4030_charger: cancel workers via devm
bci is devm-allocated. Two workers (bci->work and bci->current_worker)
dereference it. twl4030_bci_remove() disables charging and masks
interrupts. It cancels neither worker. A worker pending at remove() can
run after devm frees bci.
The USB transceiver comes from devm_usb_get_phy_by_node(). devm
unregisters its notifier only after remove() returns. A cancel_work_sync()
in remove() can then race a notifier reschedule. devm_work_autocancel()
and devm_delayed_work_autocancel() avoid that. They cancel the workers
during
In the Linux kernel, the following vulnerability has been resolved:
power: supply: max17040: propagate register read errors
max17040_get_vcell() and max17040_get_soc() ignore errors returned by
regmap_read(). When an I2C transfer fails, the uninitialized register
value is converted and reported to userspace as a valid voltage or state
of charge. The polling worker can also replace the cached state of charge
with the bogus value and emit a spurious change event.
Propagate read errors through the power supply get_property callback and
keep the last valid cached state of charge when polling fails.
Без оценкиEPSS 0,22%Нет опубликованного исправления
power: supply: max17040: synchronize work cancellation on suspend
In the Linux kernel, the following vulnerability has been resolved:
power: supply: max17040: synchronize work cancellation on suspend
max17040_work() requeues itself after every poll. cancel_delayed_work()
only cancels a pending instance and does not wait for a callback that is
already running.
If system suspend races with the polling callback, the callback can
continue accessing the fuel gauge and requeue itself after the suspend
callback returns.
Use cancel_delayed_work_sync() to ensure polling is quiesced before
suspend completes.
Без оценкиEPSS 0,18%Нет опубликованного исправления
s390/dasd: Do not complete a failed ESE read as successful
In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Do not complete a failed ESE read as successful
dasd_int_handler() completes an NRF read of an unallocated ESE track by
calling ese_read() and unconditionally marking the request
DASD_CQR_SUCCESS. dasd_eckd_ese_read() can return an error before it has
zeroed the destination buffer: a failed sense-data parse or a current
track outside the requested range both return early, leaving the
destination pages untouched. The request is still completed successfully,
so the block layer is handed stale / uninitialized memory instead of
zeros.
Check the ese_read() return val
Без оценкиEPSS 0,18%Нет опубликованного исправления
s390/dasd: Guard sysfs discipline callbacks against unallocated private data
In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Guard sysfs discipline callbacks against unallocated private data
Several sysfs show/store handlers call a discipline callback that
dereferences device->private, either directly or through the
DASD_DEFINE_ATTR() macro. During dasd_generic_set_online() the discipline
is assigned before check_device() allocates device->private, so an
unprivileged read of one of these world-readable attributes in that window
dereferences a NULL pointer and panics.
Guard the dereference inside each callback that actually touches
device->private.
Высокий · CVSS 7EPSS 0,15%Нет опубликованного исправления
s390/dasd: Propagate partial completion length across ERP recovery
In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Propagate partial completion length across ERP recovery
dasd_default_erp_postaction() copies the timing and device state from
the finished ERP request back to the original request but drops
proc_bytes. A request that was partially completed, an ESE read of a
not-yet-allocated track returns fewer bytes than requested, and then
recovered through the ERP chain loses its partial-completion length.
__dasd_cleanup_cqr() then sees proc_bytes == 0 and completes the whole
request instead of requeueing the remainder, silently returning zeroed
data for the part that was nev
Высокий · CVSS 8.4EPSS 0,19%Нет опубликованного исправления
iommu/msm: Unwind probe state on registration failure
In the Linux kernel, the following vulnerability has been resolved:
iommu/msm: Unwind probe state on registration failure
msm_iommu_probe() adds its devm-managed IOMMU object to
qcom_iommu_devices before adding the IOMMU sysfs device and registering
it with the IOMMU core.
If iommu_device_sysfs_add() fails, probe returns with the object still on
qcom_iommu_devices. The driver core then releases the devm allocation,
leaving a dangling list entry that later list walks may dereference.
If iommu_device_register() fails, the same dangling list entry remains
and the sysfs device is left registered as well.
Unwind the sysfs device and global li
iommu/vt-d: Force requesting ACS when tboot is enabled
In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Force requesting ACS when tboot is enabled
Currently the conditions of requesting ACS in detect_intel_iommu()
don't include tboot, leading to a possible misconfiguration with ACS
disabled (e.g. due to user opts) while iommu is later forced on by
tboot_force_iommu().
Fix it by checking tboot in detect_intel_iommu().
Высокий · CVSS 7.8EPSS 0,13%Нет опубликованного исправления
mmc: via-sdmmc: cancel card-detect work on remove
In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: cancel card-detect work on remove
Disabling the device interrupt and freeing the IRQ prevents new card-detect
work from being queued, but carddet_work already queued by the handler can
still run after via_sd_remove() returns. via_sdc_card_detect() recovers the
host through container_of() and dereferences its MMIO base; once remove()
returns the host can be freed, so that work would touch freed memory.
Cancel carddet_work after freeing the IRQ and before cancelling
finish_bh_work, which the card-detect handler can also queue. carddet_work
can re-enable the i
Высокий · CVSS 7.8EPSS 0,17%Нет опубликованного исправления
mmc: via-sdmmc: stop card-detect handling on probe failure
In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: stop card-detect handling on probe failure
request_irq() registers the SD card-detect interrupt and the probe enables
it before mmc_add_host() runs. If mmc_add_host() fails, the error path only
unmaps the registers and returns: the interrupt stays registered, so the
handler keeps running against the host once it is freed. via_sdc_isr()
dereferences sdhost and its MMIO base and schedules carddet_work, which
via_sdc_card_detect() also runs against freed memory through its
container_of() dereference.
Add a probe-error path that disables and frees the interrupt