Уязвимости linux-aws-fips · Страница 120

nvmet-rdma: handle inline data with a nonzero offset

In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: handle inline data with a nonzero offset nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset into the per-command inline scatterlist. The bounds check admits any offset with off + len <= inline_data_size, but the mapping still assumes the data begins in the first inline page: sg->offset = off; sg->length = min_t(int, len, PAGE_SIZE - off); When a port is configured with inline_data_size > PAGE_SIZE (settable up to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size] makes "PAGE_SIZE - off" underflow, so sg->length is set to

• Обновитесь до 5.15.0-1117.124+fips1

can: isotp: use unconditional synchronize_rcu() in isotp_release()

In the Linux kernel, the following vulnerability has been resolved: can: isotp: use unconditional synchronize_rcu() in isotp_release() isotp_notify() unregisters the (RCU) CAN filters via can_rx_unregister() and clears so->bound without waiting for a grace period. isotp_release() uses so->bound to decide whether it needs to call synchronize_rcu() before cancelling so->rxtimer, so when NETDEV_UNREGISTER runs first it skips that synchronize_rcu() and can cancel the timer while an in-flight isotp_rcv() is still executing and about to re-arm it via isotp_send_fc(), leading to a use-after-free timer callback on the freed socket. sakisho-bot rem

• Обновитесь до 5.15.0-1117.124+fips1

can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER

In the Linux kernel, the following vulnerability has been resolved: can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER isotp_release() looked up the bound network device via dev_get_by_index() using the stored ifindex. During device unregistration the device is unlisted from the ifindex hash before the NETDEV_UNREGISTER notifier chain runs, so a concurrent isotp_release() could find no device, skip can_rx_unregister() entirely, and still proceed to free the socket. Since isotp_release() had already removed itself from the isotp notifier list at that point, isotp_notify() would never get a chance to clean up either, leavin

• Обновитесь до 5.15.0-1117.124+fips1

can: isotp: serialize TX state transitions under so->rx_lock

In the Linux kernel, the following vulnerability has been resolved: can: isotp: serialize TX state transitions under so->rx_lock The TX state machine (so->tx.state) is driven from three contexts: sendmsg() claiming and progressing a transfer, the RX path consuming Flow Control/echo frames, and two hrtimers timing out a stalled transfer. Mixing a lock-free cmpxchg() claim in sendmsg() with hrtimer_cancel() calls made under so->rx_lock elsewhere left windows where a frame or timer callback could act on a state that had already moved on, corrupting an unrelated transfer. so->rx_lock now covers the full lifecycle of a TX claim: sendmsg() takes

• Обновитесь до 5.15.0-1117.124+fips1

can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF

In the Linux kernel, the following vulnerability has been resolved: can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF Commit f1b4e32aca08 ("can: bcm: use call_rcu() instead of costly synchronize_rcu()") replaced synchronize_rcu() in bcm_delete_rx_op() with call_rcu() and introduced the RX_NO_AUTOTIMER flag. However, this flag check was omitted for thrtimer in the packet rx fast-path. During BCM RX operation teardown, a concurrent RCU reader (bcm_rx_handler) can race and re-arm thrtimer via bcm_rx_update_and_send() after call_rcu() has been scheduled. Once the RCU grace period elapses, bcm_op is freed. The subsequently f

• Обновитесь до 5.15.0-1117.124+fips1

can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure

In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all mutate both fields under that same lock. Because the lockless reads and the locked writes are unordered with respect to each other, a racing bcm_notify() (device unregister) or bcm_connect() (concurrent bind on another thread sharing the socket) can make bcm_sendmsg() observe an inconsistent combination, e.g. a stale bound=1 together with the now-cleared ifindex=0, silent

• Обновитесь до 5.15.0-1117.124+fips1

can: bcm: add locking when updating filter and timer values

In the Linux kernel, the following vulnerability has been resolved: can: bcm: add locking when updating filter and timer values KCSAN detected a simultaneous access to timer values that can be overwritten in bcm_rx_setup() when updating timer and filter content while bcm_rx_handler(), bcm_rx_timeout_handler() or bcm_rx_thr_handler() run concurrently on incoming CAN traffic. Protect the timer (ival1/ival2/kt_ival1/kt_ival2/kt_lastmsg) and filter (nframes/flags/frames/last_frames) updates in bcm_rx_setup() with a new per-op bcm_rx_update_lock, taken with the matching scope in the RX handlers. memcpy_from_msg() is staged into a temporary buff

• Обновитесь до 5.15.0-1117.124+fips1

can: bcm: add missing rcu list annotations and operations

In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing rcu list annotations and operations sashiko-bot remarked the missing use of list_add_rcu() in bcm_[rx|tx]_setup() to have a proper initialized bcm_op structure when bcm_proc_show() traverses the bcm_op's under rcu_read_lock(). To cover all initial settings of the bcm_op's the list_add_rcu() calls are moved to the end of the setup code. While at it, also fix the mirroring removal side: bcm_release() called bcm_remove_op() - which frees the op via call_rcu() - on ops that were still linked in bo->tx_ops/bo->rx_ops, without list_del_rcu() first. Unlink

• Обновитесь до 5.15.0-1117.124+fips1

can: bcm: extend bcm_tx_lock usage for data and timer updates

In the Linux kernel, the following vulnerability has been resolved: can: bcm: extend bcm_tx_lock usage for data and timer updates Stage new CAN frame content for an existing tx op into a kmalloc()'d buffer and validate it there, mirroring the approach already used in bcm_rx_setup(). Only copy the validated data into op->frames while holding op->bcm_tx_lock, so bcm_can_tx() and bcm_tx_timeout_handler() can no longer observe a partially updated or unvalidated frame. Add a missing error path for memcpy_from_msg() when copying CAN frame data from userspace. Also move the kt_ival1/kt_ival2/ival1/ival2 updates in bcm_tx_setup() under op->bcm_tx

• Обновитесь до 5.15.0-1117.124+fips1

can: bcm: fix CAN frame rx/tx statistics

In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix CAN frame rx/tx statistics KCSAN detected a data race within the bcm_rx_handler() when two CAN frames have been simultaneously received and processed in a single rx op by two different CPUs. Use atomic operations with (signed) long data types to access the statistics in the hot path to fix the KCSAN complaint. Additionally simplify the update and check of statistics overflow by using the atomic operations in separate bcm_update_[rx|tx]_stats() functions. The rx variant runs under bcm_rx_update_lock to prevent races when resetting the two rx counters; the tx

• Обновитесь до 5.15.0-1117.124+fips1

can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler()

In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler() For an rx op subscribed on all interfaces (ifindex == 0), the same op is registered once in the shared per-netns wildcard filter list, so bcm_rx_handler() can run concurrently on different CPUs for frames arriving on different net devices. op->rx_stamp and op->rx_ifindex were written before bcm_rx_update_lock was taken, allowing concurrent writers to race each other - including a torn store of the 64-bit rx_stamp on 32-bit platforms. Beyond a torn store bcm_send_to_user() must report the timestamp/ifindex

• Обновитесь до 5.15.0-1117.124+fips1

can: bcm: fix stale rx/tx ops after device removal

In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix stale rx/tx ops after device removal RX: an RX_SETUP update(!) for an existing op skipped can_rx_register() unconditionally, even when a concurrent NETDEV_UNREGISTER had already torn down its registration (op->rx_reg_dev == NULL). This silently did not re-enable frame delivery for that updated filter. bcm_rx_setup() now re-registers in that case, while leaving rx_ops with ifindex = 0 (all CAN devices) which never carry a tracked rx_reg_dev registered as-is. TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving tx_ops with an active cyclic tra

• Обновитесь до 5.15.0-1117.124+fips1

can: bcm: track a single source interface for ANYDEV timeout/throttle ops

In the Linux kernel, the following vulnerability has been resolved: can: bcm: track a single source interface for ANYDEV timeout/throttle ops An ANYDEV rx op (ifindex == 0) with an active RX timeout and/or throttle timer has no defined semantics when matching frames arrive from several interfaces: bcm_rx_handler() can run concurrently for the same op on different CPUs, racing hrtimer_cancel()/ bcm_rx_starttimer() against bcm_rx_timeout_handler() and causing spurious RX_TIMEOUT notifications and last_frames corruption. The same concurrency lets throttled multiplex frames from different interfaces clobber the single rx_ifindex/rx_stamp fields

• Обновитесь до 5.15.0-1117.124+fips1

can: bcm: validate frame length in bcm_rx_setup() for RTR replies

In the Linux kernel, the following vulnerability has been resolved: can: bcm: validate frame length in bcm_rx_setup() for RTR replies bcm_tx_setup() validates cf->len against the CAN/CAN FD DLC limits before installing frames for TX_SETUP, but bcm_rx_setup() never did the same for the RTR-reply frame configured via RX_SETUP with RX_RTR_FRAME.

• Обновитесь до 5.15.0-1117.124+fips1

can: bcm: add missing device refcount for CAN filter removal

In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing device refcount for CAN filter removal sashiko-bot remarked a problem with a concurrent device unregistration in isotp.c which also is present in the bcm.c code. A former fix for raw.c commit c275a176e4b6 ("can: raw: add missing refcount for memory leak fix") introduced a netdevice_tracker which solves the issue for bcm.c too. bcm_release(), bcm_delete_rx_op() and bcm_notifier() relied on dev_get_by_index(ifindex) to re-find the device for an rx_op before unregistering its filter. If a concurrent NETDEV_UNREGISTER has already unlisted the device from

• Обновитесь до 5.15.0-1117.124+fips1

bpf,fork: wipe ->bpf_storage before bailouts that access it

In the Linux kernel, the following vulnerability has been resolved: bpf,fork: wipe ->bpf_storage before bailouts that access it Currently, copy_process() can bail out to free_task() before p->bpf_storage has been initialized, with this call graph (shown here for the !CONFIG_MEMCG case): copy_process dup_task_struct arch_dup_task_struct [copies the entire task_struct, including ->bpf_storage member] [RLIMIT_NPROC check fails] delayed_free_task free_task bpf_task_storage_free rcu_dereference(task->bpf_storage) bpf_local_storage_destroy In this case, the nascent task's ->bpf_storage member that bpf_l

• Обновитесь до 5.15.0-1119.126+fips1

net: sparx5: unregister blocking notifier on init failure

In the Linux kernel, the following vulnerability has been resolved: net: sparx5: unregister blocking notifier on init failure sparx5_register_notifier_blocks() registers the switchdev blocking notifier before allocating the ordered workqueue. If the workqueue allocation fails, the error path unregisters the switchdev and netdevice notifiers, but leaves the blocking notifier registered. Add a separate error label for the workqueue allocation failure path and unregister the switchdev blocking notifier there.

• Обновитесь до 5.15.0-1117.124+fips1

dm thin metadata: fix metadata snapshot consistency on commit failure

In the Linux kernel, the following vulnerability has been resolved: dm thin metadata: fix metadata snapshot consistency on commit failure __reserve_metadata_snap() and __release_metadata_snap() modify the superblock's held_root directly in the block_manager's buffer. If the subsequent metadata commit fails, the held_root gets flushed to disk through the abort_transaction path, resulting in inconsistent metadata. Reproducer 1: __reserve_metadata_snap() 1. Create a 2 MiB metadata device and make the region after the 14th block inaccessible, to trigger metadata commit failure in the subsequent reserve_metadata_snap operation. The 14th

• Обновитесь до 5.15.0-1117.124+fips1

dm era: fix out-of-bounds memory access for non-zero start sector

In the Linux kernel, the following vulnerability has been resolved: dm era: fix out-of-bounds memory access for non-zero start sector dm-era tracks writes in target-relative blocks, but era_map() calculates the writeset block before applying the target offset. Tables with a non-zero start sector can therefore pass an absolute mapped-device block to metadata_current_marked(). If the absolute block is beyond the current writeset size, writeset_marked() tests past the end of the in-core bitset. KASAN reports this as a vmalloc-out-of-bounds access. Apply the target offset before calculating the era block so writeset lookups use the target-r

• Обновитесь до 5.15.0-1117.124+fips1

dm-ioctl: fix a possible overflow in list_version_get_info

In the Linux kernel, the following vulnerability has been resolved: dm-ioctl: fix a possible overflow in list_version_get_info sizeof(tt->version) is 12 bytes, but the code writes 16 bytes into the output buffer - info->vers->version[0], info->vers->version[1], info->vers->version[2] and info->vers->next. This can cause buffer overflow. Fix this buffer overflow by replacing "sizeof(tt->version)" with "sizeof(struct dm_target_versions)".