Уязвимости linux-azure-fips · Страница 143

usb: host: max3421: Fix shift-out-of-bounds in max3421_hub_control()

In the Linux kernel, the following vulnerability has been resolved: usb: host: max3421: Fix shift-out-of-bounds in max3421_hub_control() The `max3421_hub_control()` function handles USB hub class requests to the virtual root hub. In the `default` branches of both the `ClearPortFeature` and `SetPortFeature` switch statements, it modifies `max3421_hcd->port_status` by left shifting 1 by the request's `value` parameter. However, it does not validate whether this shift will exceed the width of `port_status`. So if a malicious userspace task with access to the root hub via /dev/bus/usb/.../001 issues a USBDEVFS_CONTROL ioctl with `wValue` great

• Обновитесь до 6.8.0-1071.79+fips1

iio: magnetometer: ak8975: fix potential kernel stack memory leak

In the Linux kernel, the following vulnerability has been resolved: iio: magnetometer: ak8975: fix potential kernel stack memory leak Currently in the AK8975 driver there are four instances where potential uninitialized kernel stack memory leaks can occur. If i2c_smbus_read_i2c_block_data_or_emulated() returns a value less than the size of the buffer, uninitialized bytes are retained in the buffer and later the buffer is passed on to IIO buffers, potentially leaking memory to userspace. Fix this by adding checks whether the return value of the function is equal to the size of the buffer and subsequently if the value is lesser than zero to

• Обновитесь до 6.8.0-1071.79+fips1

iio: adc: xilinx-ams: fix out-of-bounds channel lookup in event handling

In the Linux kernel, the following vulnerability has been resolved: iio: adc: xilinx-ams: fix out-of-bounds channel lookup in event handling ams_event_to_channel() may return a pointer past the end of dev->channels when no matching scan_index is found. This can lead to invalid memory access in ams_handle_event(). Add a bounds check in ams_event_to_channel() and return NULL when no channel is found. Also guard the caller to safely handle this case.

• Обновитесь до 6.8.0-1071.79+fips1

iio: accel: mma8452: handle I2C read error(s) in mma8452_read()

In the Linux kernel, the following vulnerability has been resolved: iio: accel: mma8452: handle I2C read error(s) in mma8452_read() Currently, If i2c_smbus_read_i2c_block_data() fails but mma8452_set_runtime_pm_state() succeeds, mma8452_read() returns 0. As a result, the caller mma8452_read_raw() assumes the read was successful and proceeds to use a buffer containing uninitialized stack memory. Add proper checking of the I2C read return value and propagate errors to the caller.

• Обновитесь до 6.8.0-1071.79+fips1

fs/ntfs3: add bounds check to run_get_highest_vcn()

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: add bounds check to run_get_highest_vcn() run_get_highest_vcn() parses a packed NTFS mapping-pairs buffer without any length bound, relying solely on a 0x00 terminator to stop. A crafted $LogFile UpdateMappingPairs record whose embedded attribute contains mapping-pairs runs without a terminator causes the function to read past the slab allocation, triggering a KASAN slab-out-of-bounds read on mount. The sibling function run_unpack() received an analogous bounds-check in commit b62567bca474 ("ntfs3: add buffer boundary checks to run_unpack()"), but run_get_highes

• Обновитесь до 6.8.0-1071.79+fips1

dmaengine: Fix possible use after free

In the Linux kernel, the following vulnerability has been resolved: dmaengine: Fix possible use after free In dma_release_channel(), check chan->device->privatecnt after call dma_chan_put(). However, dma_chan_put() call dma_device_put() which could release the last reference of the device if the DMA provider is already gone and hence free it. Fixes it by moving dma_chan_put() after the check.

• Обновитесь до 6.8.0-1071.79+fips1

dmaengine: dma-axi-dmac: use DMA pool to manange DMA descriptor

In the Linux kernel, the following vulnerability has been resolved: dmaengine: dma-axi-dmac: use DMA pool to manange DMA descriptor For architectures like Microblaze or arm64 (where this IP is used), DMA_DIRECT_REMAP is set which means that dma_alloc_coherent() might remap (and hence vmalloc()) some memory. This became visible in a design where dma_direct_use_pool() is not possible. With the above, when calling dma_free_coherent(), vunmap() would be called from softirq context and thus leading to a BUG(). To fix it, use a dma pool that is allocated in .device_alloc_chan_resources() and allocate blocks from it. The key point is that now dm

• Обновитесь до 6.8.0-1071.79+fips1

xprtrdma: Decouple req recycling from RPC completion

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Decouple req recycling from RPC completion rl_kref formerly served two distinct lifetimes through a single refcount: it gated when a Reply could wake its RPC task, and it gated when an rpcrdma_req could return to its free pool. The marshal path took the Send-side reference only when SGEs needed DMA-unmap (sc_unmap_count > 0), which made a Send carrying only pre-registered buffers an exception: the Reply handler dropped rl_kref from 1 to 0 and freed the req while the HCA might still be DMA-reading from its send buffer. Give rl_kref a narrower job. The RPC layer ta

• Обновитесь до 6.8.0-1071.79+fips1

nfs: use nfsi->rwsem to protect traversal of the file lock list

In the Linux kernel, the following vulnerability has been resolved: nfs: use nfsi->rwsem to protect traversal of the file lock list Lingfeng identified a bug and suggested two solutions, but both appear to have issues. Generally, we cannot release flc_lock while iterating over the file lock list to avoid use-after-free (UAF) problems with file locks. However, functions like nfs_delegation_claim_locks and nfs4_reclaim_locks cannot adhere to this rule because recover_lock or nfs4_lock_delegation_recall may take a long time. To resolve this, NFS switches to using nfsi->rwsem for the same protection, and nfs_reclaim_locks follows this approach

fs/ntfs3: resize log->one_page_buf when adopting on-disk page size

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: resize log->one_page_buf when adopting on-disk page size log_replay() allocates log->one_page_buf using the page size that was chosen from the host PAGE_SIZE: log->one_page_buf = kmalloc(log->page_size, GFP_NOFS); Later, when a restart area is found, the log page size recorded on disk is adopted: t32 = le32_to_cpu(log->rst_info.r_page->sys_page_size); if (log->page_size != t32) { log->l_size = log->orig_file_size; log->page_size = norm_file_page(t32, &log->l_size, t32 == DefaultLogPageSize); } If the on-disk page size is larger than the size used

• Обновитесь до 6.8.0-1071.79+fips1

xprtrdma: Fix ep kref imbalance on ADDR_CHANGE

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Fix ep kref imbalance on ADDR_CHANGE rpcrdma_cm_event_handler() falls through to the disconnected: label on RDMA_CM_EVENT_ADDR_CHANGE and calls rpcrdma_ep_put() with no matching get when the event arrives before RDMA_CM_EVENT_ESTABLISHED. The kref then underflows during connect teardown and rpcrdma_xprt_disconnect() operates on a freed ep. Reference counts across a normal connection lifecycle: rpcrdma_ep_create() kref_init ->1 rpcrdma_xprt_connect() ep_get ->2 (before post_recvs) RDMA_CM_EVENT_ESTABLISHED ep_get

• Обновитесь до 6.8.0-1071.79+fips1

xprtrdma: Check frwr_wp_create() during connect

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Check frwr_wp_create() during connect frwr_wp_create() creates the singleton Memory Region used to encode padding for Write chunks whose payload length is not XDR-aligned. Its failure paths return a negative errno and leave ep->re_write_pad_mr set to NULL. rpcrdma_xprt_connect() currently ignores that return value. If frwr_wp_create() fails after the rest of the connection setup succeeds, xprt_rdma_connect_worker() treats the connection attempt as successful and sets XPRT_CONNECTED. A later NFS/RDMA read with a non-4-byte-aligned receive page length reaches rpcrd

• Обновитесь до 6.8.0-1071.79+fips1

xprtrdma: Fix bcall rep leak and unbounded peek

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Fix bcall rep leak and unbounded peek rpcrdma_is_bcall() decodes a reply's first words to decide whether the frame is a backchannel call. Two issues in that decode path let a short or malformed reply leak the receive buffer and drain the Receive queue. First, the speculative peek p = xdr_inline_decode(xdr, 0); /* five p++ reads follow */ asks xdr_inline_decode() for zero bytes, which returns xdr->p without consulting xdr->end. The five subsequent __be32 reads can then walk up to 20 bytes past the wire payload into stale regbuf contents and misclassify t

• Обновитесь до 6.8.0-1071.79+fips1

xprtrdma: Repost Receive buffers for malformed replies

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Repost Receive buffers for malformed replies rpcrdma_wc_receive() decrements the transport's Receive count for every completion before it dispatches a successful Receive to rpcrdma_reply_handler(). The handler must post a replacement Receive WR before returning unless ownership of the rep has moved elsewhere, as on the backchannel path. Commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives") moved the Receive refill out of rpcrdma_wc_receive(), where it had run ahead of every reply, into rpcrdma_reply_handler() so that the r

• Обновитесь до 6.8.0-1071.79+fips1

xfrm: Fix dev use-after-free in xfrm async resumption

In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix dev use-after-free in xfrm async resumption xfrm async resumption hold skb->dev refcnt until after transport_finish. However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking device reference, such as vti_rcv_cb. The subsequent async resumption will decrement the tunnel device's reference count, which lead to uaf of tunnel dev and refcnt leak of orig dev as below: unregister_netdevice: waiting for vti1 to become free. Usage count = -2 Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set by xfrm_rcv_cb can race with device teardow

apparmor: check label build before no_new_privs test

In the Linux kernel, the following vulnerability has been resolved: apparmor: check label build before no_new_privs test aa_change_profile() builds a replacement label with fn_label_build_in_scope() before the no_new_privs subset check. The build helper can fail and return NULL or an ERR_PTR, but the result was passed to aa_label_is_unconfined_subset() before the existing IS_ERR_OR_NULL() check. Reuse the existing target-label build failure handling immediately after the build. This preserves the current audit handling while preventing the subset helper from dereferencing an invalid label.

• Обновитесь до 6.8.0-1071.79+fips1

apparmor: aa_label_alloc use aa_label_free on alloc failure

In the Linux kernel, the following vulnerability has been resolved: apparmor: aa_label_alloc use aa_label_free on alloc failure aa_label_alloc() allocates a secid before allocating or taking the label proxy. If the later proxy step fails, the error path only freed the label memory, leaking any resources initialized by aa_label_init(). Use aa_label_free() on the failure path so partially initialized labels release their secid and other label resources before the backing memory is freed.

• Обновитесь до 6.8.0-1071.79+fips1

i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev()

In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev() i3c_hci_addr_to_dev() walks bus->devs.i3c, which is protected by bus.lock (rwsem). However, it is invoked from the MIPI I3C HCI IRQ handler, which cannot take bus.lock. This allows concurrent device addition/removal in the I3C core to modify the list while it is being traversed, potentially leading to use-after-free or crashes. Remove the dependency on the bus device list and introduce a dedicated lookup table. Add an ibi_devs[] array indexed by DAT entry, maintained under hci->lock. Update the array when IBIs are en

xfrm: Fix xfrm state cache insertion race

In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix xfrm state cache insertion race The xfrm input state cache insertion code checks the validity of the state before acquiring the global xfrm_state_lock. Thus it's possible for someone else to kill the state after it passed the validity check, and then the insertion will add the dead state to the cache. Fix this by moving the validity check inside the lock. This entire function is called on the input path, where BH must be off (e.g., the caller of this function xfrm_input acquires its spinlocks without disabling BH). So there is no need to disable BH here or tak

• Обновитесь до 6.8.0-1071.79+fips1

xfrm: validate selector family and prefixlen during match

In the Linux kernel, the following vulnerability has been resolved: xfrm: validate selector family and prefixlen during match syzbot reported a shift-out-of-bounds in xfrm_selector_match() due to AF_UNSPEC selector with large prefixlen (e.g. 128) matched against IPv4 flow (when XFRM_STATE_AF_UNSPEC is set). Fix this by: - Rejecting mismatched families in xfrm_selector_match. - Returning false in addr4_match if prefixlen > 32. - Returning false in addr_match if prefixlen > 128 (prevents overflow).

• Обновитесь до 6.8.0-1071.79+fips1