Уязвимости linux-realtime · Страница 142

tipc: fix UAF in tipc_l2_send_msg()

In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in tipc_l2_send_msg() Syzbot reported a slab-use-after-free in ipvlan_hard_header() when called from tipc_l2_send_msg(). The root cause is that tipc_disable_l2_media() calls synchronize_net() while b->media_ptr is still valid. This allows concurrent RCU readers to obtain the device pointer after synchronize_net() has finished. The pointer is cleared later in bearer_disable(), but without any subsequent synchronization, allowing the device to be freed while still in use by readers. Fix this by clearing b->media_ptr in tipc_disable_l2_media() before calling sy

• Обновитесь до 6.8.1-1062.63

tcp: ipv6: clamp default adverting MSS to avoid GSO_BY_FRAGS (0xFFFF)

In the Linux kernel, the following vulnerability has been resolved: tcp: ipv6: clamp default adverting MSS to avoid GSO_BY_FRAGS (0xFFFF) When MTU is large, ip6_default_advmss() can return IPV6_MAXPLEN (65535). This is interpreted by TCP as mss_clamp, allowing the MSS to reach 65535. However, 0xFFFF is also used as a magic value GSO_BY_FRAGS in the kernel. If a TCP packet with gso_size=0xFFFF is passed to skb_segment(), it will be mistakenly treated as GSO_BY_FRAGS, leading to a NULL pointer dereference because local TCP packets do not use frag_list. Fix this by returning min(IPV6_MAXPLEN, GSO_BY_FRAGS - 1) (65534) from ip6_default_advmss

• Обновитесь до 6.8.1-1062.63

RDMA/bnxt_re: Initialize dpi variable to zero

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Initialize dpi variable to zero dpi is initialized only for BNXT_RE_ALLOC_WC_PAGE, but copied for all the cases. So initialize the dpi to 0.

RDMA/bnxt_re: Free CQ toggle page after firmware teardown

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Free CQ toggle page after firmware teardown Free the toggle page only after firmware teardown completes so that an NQ interrupt arriving during bnxt_qplib_destroy_cq() won't write the toggle value to an already-freed page. Move free_page() after bnxt_qplib_destroy_cq.

RDMA/bnxt_re: Proper rollback if the ioremap fails

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Proper rollback if the ioremap fails bnxt_qplib_alloc_dpi returns success even if ioremap fails. Add the proper rollback when the ioremap fails and return -ENOMEM status.

RDMA/bnxt_re: Avoid repeated requests to allocate WC pages

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Avoid repeated requests to allocate WC pages Applications can request multiple WC pages for the same ucontext. As of now, only 1 WC page per ucontext is supported. Add a lock to avoid concurrent access and a check to fail repeated requests. Also, if the mmap entry insert fails for the WC, free the Doorbell page index mapped for the WC page.

RDMA/irdma: Replace waitqueue and flag with completion

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Replace waitqueue and flag with completion The driver previously used a waitqueue along with an explicit request_done flag, but without proper barriers around request_done. An earlier patch by Gui-Dong Han <hanguidong02@gmail.com> attempted to fix this by adding the missing memory barriers. Rather than adding the barriers, this patch replaces the waitqueue+flag with a completion, which is designed for this exact purpose.

net: serialize netif_running() check in enqueue_to_backlog()

In the Linux kernel, the following vulnerability has been resolved: net: serialize netif_running() check in enqueue_to_backlog() Syzbot reported a KASAN slab-use-after-free in fib_rules_lookup(). The root cause is a race condition where packets can escape the backlog flushing during device unregistration (e.g., during netns exit). Commit e9e4dd3267d0 ("net: do not process device backlog during unregistration") introduced a lockless netif_running() check in enqueue_to_backlog() to prevent queuing packets to an unregistering device. However, this creates a TOCTOU race window. A lockless transmitter (like veth_xmit) can pass the check befo

ksmbd: fix use-after-free in same_client_has_lease()

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in same_client_has_lease() same_client_has_lease() returns an opinfo pointer from ci->m_op_list after dropping ci->m_lock without taking a reference. smb_grant_oplock() then dereferences that pointer in copy_lease() and when checking breaking_cnt. A concurrent close can remove the old lease from ci->m_op_list and drop the last reference before the caller uses the returned pointer, leading to a use-after-free. Take a reference when same_client_has_lease() selects an existing lease, drop any previous match while scanning, and release the returned r

• Обновитесь до 6.8.1-1062.63

net/9p: fix race condition on rdma->state in trans_rdma.c

In the Linux kernel, the following vulnerability has been resolved: net/9p: fix race condition on rdma->state in trans_rdma.c The rdma->state field is modified without holding req_lock in both recv_done() and p9_cm_event_handler(), while rdma_request() accesses the same field under the req_lock spinlock. This inconsistent locking creates a race condition: - recv_done() running in softirq completion context sets rdma->state = P9_RDMA_FLUSHING without acquiring req_lock - p9_cm_event_handler() modifies rdma->state at multiple points (ADDR_RESOLVED, ROUTE_RESOLVED, ESTABLISHED, CLOSED) without req_lock - rdma_request() uses spin_lock_

• Обновитесь до 6.8.1-1062.63

staging: nvec: fix use-after-free in nvec_rx_completed()

In the Linux kernel, the following vulnerability has been resolved: staging: nvec: fix use-after-free in nvec_rx_completed() In nvec_rx_completed(), when an incomplete RX transfer is detected, nvec_msg_free() is called to return the message back to the pool by clearing its 'used' atomic flag. Immediately after this, the code accesses nvec->rx->data[0] to check the message type. Since nvec_msg_free() marks the pool slot as available via atomic_set(), any concurrent or subsequent call to nvec_msg_alloc() could claim that same slot and overwrite its data[] array. Reading nvec->rx->data[0] after freeing the message is therefore a use-after-fre

• Обновитесь до 6.8.1-1062.63

soundwire: fix bug in sdw_add_element_group_count found by syzkaller

In the Linux kernel, the following vulnerability has been resolved: soundwire: fix bug in sdw_add_element_group_count found by syzkaller The original implementation caused an out-of-bounds memory access in the sdw_add_element_group_count for-loop when i == num. for (i = 0; i <= num; i++) { if (rate == group->rates[i] && lane == group->lanes[i]) ... To fix this error, the function now checks for existing rate/lane entries in the group(a function parameter) using a for-loop before adding them. No functional changes apart from this fix.

PCI: Check ROM header and data structure addr before accessing

In the Linux kernel, the following vulnerability has been resolved: PCI: Check ROM header and data structure addr before accessing We meet a crash when running stress-ng on x86_64 machine: BUG: unable to handle page fault for address: ffa0000007f40000 RIP: 0010:pci_get_rom_size+0x52/0x220 Call Trace: <TASK> pci_map_rom+0x80/0x130 pci_read_rom+0x4b/0xe0 kernfs_file_read_iter+0x96/0x180 vfs_read+0x1b1/0x300 Our analysis reveals that the ROM space's start address is 0xffa0000007f30000, and size is 0x10000. Because of broken ROM space, before calling readl(pds), the pds's value is 0xffa0000007f3ffff, which is already p

• Обновитесь до 6.8.1-1062.63

mailbox: mtk-adsp: fix UAF during device teardown

In the Linux kernel, the following vulnerability has been resolved: mailbox: mtk-adsp: fix UAF during device teardown When the SOF audio driver fails to initialize (e.g. firmware boot timeout), its devres unwind frees the snd_sof_dev object that the mailbox client (mtk-adsp-ipc) reaches via chan->cl->rx_callback. The mtk-adsp-mailbox shutdown clears the mailbox command registers but leaves the IRQ line unmasked, so a late interrupt can still queue a threaded handler after mbox_free_channel() had cleared chan->cl, and mbox_chan_received_data() would then trigger UAF: BUG: KASAN: slab-use-after-free in sof_ipc3_validate_fw_version sof_i

• Обновитесь до 6.8.1-1062.63

coresight: platform: defer connection counter increment until alloc succeeds

In the Linux kernel, the following vulnerability has been resolved: coresight: platform: defer connection counter increment until alloc succeeds coresight_add_out_conn() increments nr_outconns before calling devm_krealloc_array() and again before devm_kmalloc(). If either allocation fails, the counter is already bumped while the corresponding array entry is NULL or uninitialized garbage. coresight_add_in_conn() has the same problem with nr_inconns and devm_krealloc_array(). In both cases the probe returns -ENOMEM, which causes coresight_get_platform_data() to call coresight_release_platform_data() for cleanup. That function iterates up to

staging: most: video: avoid double free on video register failure

In the Linux kernel, the following vulnerability has been resolved: staging: most: video: avoid double free on video register failure comp_register_videodev() allocates a video_device with video_device_alloc() and releases it if video_register_device() fails. This can double free the video_device when __video_register_device() reaches device_register() and that call fails: video_register_device() -> __video_register_device() -> device_register() fails -> put_device(&vdev->dev) -> v4l2_device_release() -> vdev->release(vdev) -> video_device_release(vdev) comp_registe

• Обновитесь до 6.8.1-1062.63

usb: host: max3421: Fix shift-out-of-bounds in max3421_hub_control()

In the Linux kernel, the following vulnerability has been resolved: usb: host: max3421: Fix shift-out-of-bounds in max3421_hub_control() The `max3421_hub_control()` function handles USB hub class requests to the virtual root hub. In the `default` branches of both the `ClearPortFeature` and `SetPortFeature` switch statements, it modifies `max3421_hcd->port_status` by left shifting 1 by the request's `value` parameter. However, it does not validate whether this shift will exceed the width of `port_status`. So if a malicious userspace task with access to the root hub via /dev/bus/usb/.../001 issues a USBDEVFS_CONTROL ioctl with `wValue` great

• Обновитесь до 6.8.1-1062.63

iio: magnetometer: ak8975: fix potential kernel stack memory leak

In the Linux kernel, the following vulnerability has been resolved: iio: magnetometer: ak8975: fix potential kernel stack memory leak Currently in the AK8975 driver there are four instances where potential uninitialized kernel stack memory leaks can occur. If i2c_smbus_read_i2c_block_data_or_emulated() returns a value less than the size of the buffer, uninitialized bytes are retained in the buffer and later the buffer is passed on to IIO buffers, potentially leaking memory to userspace. Fix this by adding checks whether the return value of the function is equal to the size of the buffer and subsequently if the value is lesser than zero to

• Обновитесь до 6.8.1-1062.63

iio: adc: xilinx-ams: fix out-of-bounds channel lookup in event handling

In the Linux kernel, the following vulnerability has been resolved: iio: adc: xilinx-ams: fix out-of-bounds channel lookup in event handling ams_event_to_channel() may return a pointer past the end of dev->channels when no matching scan_index is found. This can lead to invalid memory access in ams_handle_event(). Add a bounds check in ams_event_to_channel() and return NULL when no channel is found. Also guard the caller to safely handle this case.

• Обновитесь до 6.8.1-1062.63

iio: accel: mma8452: handle I2C read error(s) in mma8452_read()

In the Linux kernel, the following vulnerability has been resolved: iio: accel: mma8452: handle I2C read error(s) in mma8452_read() Currently, If i2c_smbus_read_i2c_block_data() fails but mma8452_set_runtime_pm_state() succeeds, mma8452_read() returns 0. As a result, the caller mma8452_read_raw() assumes the read was successful and proceeds to use a buffer containing uninitialized stack memory. Add proper checking of the I2C read return value and propagate errors to the caller.

• Обновитесь до 6.8.1-1062.63